Operation Manual

274 Paper Handling
Cutting the roll paper or printing page lines
When your print job is finished, the printer cuts the roll paper
automatically or prints page lines around the printed data
according to your settings. You can make these settings using the
control panel or printer software.
Note:
❏ Printer driver settings usually override the control panel settings.
Use your printer driver settings whenever possible.
❏ When the printer cuts the printout, it may take a little time to
proceed with cutting after printing is finished.
Cutting the roll paper automatically
To cut the roll paper automatically after printing, follow the steps
below.
1. Before printing, press the Paper Source button to select
Roll Auto Cut On .
2. Print your data.
To make the auto cut setting using the printer driver, see “Making
the Auto Cut setting” on page 52 for Windows, “Making the Auto
Cut setting” on page 143 for Mac OS 9.x, or “Auto Cut” on page
205 for Mac OS X.
Cutting the roll paper with the cut button
To cut the roll paper with the cut button after printing, follow the
steps below.
1. Before starting to print, press the Paper Source button to
select Roll Auto Cut Off
.
2. Print your data.