Operation Manual

310 Maintenance and Transportation
Replacing the Paper Cutter
When the paper cutter does not cut cleanly, it may be blunt and
require replacement.
w
Warning:
Be careful not to cut yourself while replacing the paper cutter.
To check the product code of the Auto Cutter Spare Blade, see
“Consumable Products” on page 375.
To replace the paper cutter, follow the steps below.
1. Make sure the printer is on.
2. Press the Menu
button to enter the SelecType mode.
3. Press the Paper Feed or Paper Feed button to display
CUTTER REPLACE on the LCD.
Note:
You can also take the following steps.
Press the Paper Feed or Paper Feed button to display
MAINTENANCE on the LCD. Press the Menu
button, and then
press the Paper Feed or Paper Feed button to display
CUTTER REPL.
4. Press the Menu
button to display EXEC. Press the Menu
button again. The paper cutter holder moves to the
replacement position.
c
Caution:
Never move the paper cutter holder by hand; otherwise,
damage to your printer may occur.