Operation Manual

324 Problem Solver
DRIVER INK SET
SETTING IS WRONG
MISMATCH ERROR
Note:
These messages
are displayed on
the LCD
alternately.
The cartridge option of
the printer driver has not
been changed yet.
Stop printing, and then
press and hold the
Pause button for 3
seconds. Finally, select
the correct ink
cartridge in the printer
driver according to the
actual ink cartridge set
on the printer. See
“Updating the printer
driver information” on
page 306. If you want to
continue printing, press
the Pause button.
Non-Epson genuine ink
cartridge is installed.
Press the Pause button
for 3 seconds to cancel
printing. If you want to
continue printing, press
the Pause button.
LOAD ROLL PAPER The roll paper is not set
correctly.
Load the roll paper
correctly, and select
Roll Auto Cut On or
Roll Auto Cut Off .
See “Loading roll
paper” on page 269.
LOAD SHEET PAPER
IN P. TRAY
The cut sheet media is
not set correctly in the
paper tray.
Set the cut sheet media
in the paper tray
correctly, and select
Sheet . See “Loading
cut-sheet media” on
page 277.
FEED SHEET PAPER The cut sheet media
needs to be loaded
manually.
Load the cut sheet
media.
FORBIDDEN MEDIA
FROM P. TRAY
Cut sheet media, which
is to be loaded from the
front or rear manual feed
slot, is being loaded from
the paper tray.
Remove the cut sheet
media from the paper
tray, and load it from
the proper paper feed
slot. See “Checking the
paper path” on page
276.