Operation Manual

Problem Solver 341
8
8
8
8
8
8
8
8
8
8
8
8
English
❏ Run the Head Cleaning utility to clear any clogged ink
nozzles. For Windows, see “Cleaning the print head” on page
80. For Mac OS 9.x, see “Cleaning the print head” on page 165.
For Mac OS X, see “Cleaning the print head” on page 219.
You can also clean the print head nozzles using the control
panel. To clean the print head nozzles, press the Menu
button for 3 seconds.
❏ Check the Ink check light. If necessary, replace ink cartridges.
See “Replacing Ink Cartridges” on page 295.
❏ Select Standard as Platen Gap in the Paper Configuration
dialog box. For Windows, see “Paper Configuration” on page
30. For Mac OS 9.x, see “Paper Configuration” on page 125.
For Mac OS X, see “Paper Configuration” on page 202.
Blurry or smeared printout
Try one or more of these solutions:
❏ For Windows, check the Media Type setting in the Main
menu. Make sure it is correct for the paper you are using. See
“Making Settings on the Main Menu” on page 21.
For Mac OS 9.x, check the Media Type setting in the Print
dialog. Make sure it is correct for the paper you are using. See
“Making Settings in the Print Dialog” on page 117.
For Mac OS X, check the Media Type setting in the Print
Settings selected in the Print dialog. Make sure it is correct for
the paper you are using. See “Page Setup” on page 188.
❏ If the paper you are using is not supported by the printer
driver, make the paper thickness setting in the SelecType
mode. See “CUSTOM PAPER” on page 243.