Operation Manual

344 Problem Solver
❏ Delete unnecessary files to make room on your hard disk
drive.
Note for Windows:
Your computer may not have enough memory. For further tips, see
“Increasing the Print Speed” on page 93.
Roll paper cannot be cut
Try one or more of these solutions:
❏ Make sure that paper cutter cover is set correctly. See
“Replacing the Paper Cutter” on page 310.
❏ Make sure that the Roll Auto Cut On
is selected as the
Paper Source on the LCD. Press the Paper Source button
if necessary. Then press and hold the Paper Source button
for 3 seconds. The printer cuts the roll paper.
❏ Make sure that Normal Cut, Single Cut, or Double Cut is
selected as the Auto Cut in the printer driver. For Windows,
see “Making the Auto Cut setting” on page 52. For Mac OS
9.x, see “Making the Auto Cut setting” on page 143. For Mac
OS X, see “Auto Cut” on page 205.
❏ Cut the roll paper by hand if necessary. Check that the paper
thickness of the roll paper loaded in the printer matches the
paper specification (see “Paper” on page 365). If so, the paper
cutter may be blunt and require replacement. See “Replacing
the Paper Cutter” on page 310.
Note:
If you use roll paper other than Epson special media, see the user
documentation included with the paper, or contact your supplier.