Setup guide

26 | Setting the Language
2. Thread the power cords through the cable supports. Connect the power cord to the printer and use
the cable supports to restrain the cord.
3. Plug the printer into a properly grounded outlet. Note that two outlets are required, for a total of 20
amps. It is recommended that the outlets be powered by a dedicated 30-amp circuit.
Caution: Use only the type of power source indicated on the printer’s label.
Setting the Language
1. Turn on the printer, if necessary.
2. Press the Menu button.
3. Press d or u to select Preferences, and press OK.
4. Press d or u to select Language, and press OK.
5. Select your language, and press OK.
6. Press the y button until you return to the main menu.