User's Guide

Using the Control Panel Menu 123
Print Media List
Auto - Auto is recommended in most situations. If Media Size Check is not On
when Auto is set, the appropriate tension is not applied because the
media width cannot be detected.
If Media Size Check is Off, set Take-up Tension to Manual and then set
the recommended value for the media width.
If Take-up Tension is set to Auto and creases appear during printing or
black bands (dark stripes) appear in the prints, set Take-up Tension to
Manual. When Manual is set, we recommend setting Take-up Tension to
Lv3.
If other values are used, banding (horizontal banding, lines, or strips of
uneven color) or wrinkles may appear in the prints.
Manual 1 to 6
Feed Speed 1 to 2 Choose a slower feed speed if thin media is creased or torn or sticks
together during printing. The lower the value, the slower the speed.
Restore Settings Yes If Yes is selected, media settings are returned to their default settings.
No
Parameter Explanation
Print Print the contents of media setting banks 1 to 30.
Item Parameter Explanation