User's Guide

Basic Operations 46
4. Press the Z button to print the amount of media remaining.
Cutting Media
Use a cutter (not included) to cut the media when printing is complete. This section
described how to use a cutter to cut the media.
1. Confirm that the printer is ready to print.
2. Press the button and the Z button. The printer will feed the trailing edge of the
printed media to a position over the cutter groove.
c
Caution:
❏ The after heater may be hot; observe all necessary precautions. Failure to observe the
necessary precautions could result in burns.
❏ When cutting media, be careful not to cut your fingers or hands with the cutter or other
blades.