User's Guide

Basic Operations 69
Recommended setting values for Blank Area Feed
After Heater Feed
3. After finishing the configuration, press the Z button.
4. Press the y button twice to return to the customize settings menu.
Media Suction
While printing, the printer uses suction to provide the pressure needed to maintain the
correct distance between the media and the print head; the amount of pressure required
varies with the type of media. Less suction is used for thin media that would not print or
feed correctly at high levels of suction.
1. Use the d/u buttons to select Media Suction and press the Z button.
2. Use the d/ u buttons to choose a value.
3. Select the desired option and press the Z button.
4. Press the y button to return to the customize settings menu.
Head Movement
Choose the range in which the print head moves during printing.
1. Use the d/u buttons to select Head Movement and press the Z button.
2. Use the d/u buttons to select the desired setting and press the Z button.
For faster printing, select Data Width.
For even, high-quality printing, select Printer Full Width.
Multi-Strike Printing
Choose the number of times each line is printed.
Number of passes Blank Area Feed
1Mode 1
2 to 4 Mode 2
5 to 8 Mode 3
(1) Use the d/u buttons to select After Heater Feed and press the Z button.
(2) Use the d/u buttons to select whether to feed media to the after heater after printing (On/Off).