User's Guide
Basic Operations 72
Feed Speed
Choose a slower feed speed if media is creased or torn or sticks together during printing.
The lower the value, the slower the speed.
1. Use the d/u buttons to select Feed Speed and press the Z button.
2. Use the d/u buttons to choose a value.
3. Select the desired option and press the Z button.
4. Press the y button to return to the customize settings menu.
Exiting the Menus
Press W to exit the menus.
Changing Heater Settings
Adjust the temperature of the after heater during printing.
The default Heater Temperature is 55 °C (131 °F).
Heater status can be viewed on the control panel. See “Understanding the Display” on
page 18.
(3) After finishing the configuration, press the Z button.
(4) Press the y button twice to return to the customize settings menu.