User's Guide

Basic Operations 77
Using a Test Pattern
1. Confirm that the media has been pulled to the prescribed position.
Correct adjustment may not be possible if the media is not pulled sufficiently. See
“Loading and Exchanging Media” on page 30.
2. After confirming that the printer is ready to print, press the Menu button.
The settings menu will be displayed.
3. Select Media Setup and press the Z button.
4. Use the d/u buttons to select Customize Settings and press the Z button.
5. Use the d/u buttons to select a media setting bank number between 1 and 30 and then
press the Z button.
Note that any settings already saved in the printer will be overwritten.
6. Use the d/u buttons to select Feed Adjustment and press the Z button.
7. Select Manual and press the Z button.
8. Use the d/u buttons to select a test pattern and press the Z button twice.
The longer the pattern, the more accurate the adjustment.
9. The printer will print a test pattern.
When printing is complete, the media will automatically be fed to a position where the
pattern is clearly visible.