User’s Guide CMP0031-01 EN
SC-P800 Series User’s Guide Copyrights and Trademarks Copyrights and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson printer. Epson is not responsible for any use of this information as applied to other printers.
SC-P800 Series User’s Guide Contents Contents Printable area. . . . . . . . . . . . . . . . . . . . . . . . . . . The Printed Area for Cut Sheets. . . . . . . . . . . . The Printed Area for Roll Paper. . . . . . . . . . . . Changing the Type of Black Ink. . . . . . . . . . . . . . Switching Automatically. . . . . . . . . . . . . . . . . Switching Manually. . . . . . . . . . . . . . . . . . . . . Energy Saving Settings. . . . . . . . . . . . . . . . . . . .
SC-P800 Series User’s Guide Contents Multi-Page Printing. . . . . . . . . . . . . . . . . . . . . . Manual Double-Sided Printing(Windows only) ..................................... Cautions when Performing Double-Sided Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting Procedures for Printing. . . . . . . . . . . . Poster Printing (Enlarge to cover several sheets and print - Windows only). . . . . . . . . . . . . . . . . Setting Procedures for Printing. . . . . . . . . . . .
SC-P800 Series User’s Guide Contents Help for Users in Hong Kong. . . . . . . . . . . . . . 136 Help for Users in Malaysia. . . . . . . . . . . . . . . . 136 Help for Users in India. . . . . . . . . . . . . . . . . . 136 Help for Users in the Philippines. . . . . . . . . . .
SC-P800 Series User’s Guide Introduction ❏ Avoid electrical outlets controlled by wall switches or automatic timers. Introduction ❏ Keep the entire computer system away from potential sources of electromagnetic interference, such as loudspeakers or the base units of cordless telephones. Important Safety Instructions ❏ Use only the type of power source indicated on the product’s label. Read all of these instructions before using the printer.
SC-P800 Series User’s Guide Introduction ❏ When connecting the printer to a computer or other device with a cable, ensure the correct orientation of the connectors. Each connector has only one correct orientation. Inserting a connector in the wrong orientation may damage both devices connected by the cable. ❏ Shake new ink cartridges four or five times before opening their packages. ❏ Do not shake ink cartridges after opening their packages; this can cause leakage.
SC-P800 Series User’s Guide Introduction ❏ Only use a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers. ❏ If the liquid crystal solution gets on your hands, wash them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush them immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor immediately. ❏ The exterior cover of the LCD screen could break if it receives a heavy impact.
SC-P800 Series User’s Guide Introduction Printer Parts Front section A Paper support Supports paper to prevent it from falling forward or backward. B Edge guide Move left and right depending on the size of the paper that you want to load. This prevents paper being fed at a slant. C Printer cover Open when cleaning the inside of the printer or removing jammed paper. The cover is normally closed when the printer is in use. D Ink cartridge cover Open when installing or replacing ink cartridges.
SC-P800 Series User’s Guide Introduction H Maintenance cartridge cover Open when replacing the maintenance cartridge. U “Replacing the Maintenance Cartridge” on page 103 I Control panel U “Control panel” on page 12 U “Using the Control Panel” on page 92 J Print head Fires ink via high density nozzles while moving left and right to print. Do not move the print head by hand. K Paper support edge guide Only use this to prevent skewing of plain paper that is A3 size or larger.
SC-P800 Series User’s Guide Introduction C Airflow vents Exhausts internal air. Do not cover the vents. D USB port Connects the USB cable. E LAN port Connects the LAN cable. F Status light Indicates the network communication speed. On: 100Base-TX Off: Not connected, energy saving, or 10Base-T G Data light Indicates the status of the network connection or receiving data. On: Connected. Flashing: Receiving data. Off: Not connected or energy saving. H AC inlet Connects the supplied power cable.
SC-P800 Series User’s Guide Introduction Control panel Note: You can change the angle of the control panel. A P light (power light) On : The power is on. Off : The power is off. B P button (power button) Turns the power on and off. C y button (back button) Press to return to the previous screen while the Menu is displayed. D Screen Displays the printer's status, menus, error messages, and so on.
SC-P800 Series User’s Guide Introduction Home Screen View Indicates that the ink is running low or the maintenance cartridge is running out of space. Prepare a new cartridge. The A icons indicate the status. Indicates the selected black ink using the following icons. Press the B to G icons to display menus for settings and checking. Photo black ink Matte black ink Displayed when connected to a wired LAN. A Status icon See the following table for the explanations of the icons.
SC-P800 Series User’s Guide Introduction Load Guide is displayed when paper is not loaded. You can continue by checking the selected Load Guide procedure on the screen. Displays the operation mode, radio wave status, and connection status for the wireless LAN. The icon is not displayed when the wireless LAN is disconnected. Media Setup is displayed when paper is loaded. You can set the Media Size and Media Type. The number of lines indicates the radio wave strength.
SC-P800 Series User’s Guide Introduction PK Photo Black LK Light Black LLK Light Light Black C Cyan VM Vivid Magenta LC Light Cyan VLM Vivid Light Magenta Y Yellow You can perform printer maintenance and adjust printer settings. U “Menus” on page 92 G You can eject paper that has been loaded. The following can be performed when roll paper is loaded. Maintenance cartridge No error. The level of the indicator changes depending on the amount of free space in the cartridge.
SC-P800 Series User’s Guide Introduction 3. Reduces graininess Printer Features 4. Increases the gamut for rich color reproduction With this large ink jet color printer, you can print on paper up to A2 size. Precise output using the maximum resolution of 2880 × 1440 dpi and minimum ink dot size of 3.5 pl Print beautiful photographs with little graininess. The main features of this printer are described below.
SC-P800 Series User’s Guide Introduction U “Setting Items for the Setup Menu” on page 93 Printing from a smart device By using AirPrint or Google cloud print, you can print from iOS or Android smart devices. Borderless printing function You can print with no margins for all directions with both auto expand or retain size print settings.
SC-P800 Series User’s Guide Introduction requirements are met. For more details, see the manual supplied with the paper. Notes on Usage and Storage Also, when operating in dry areas, air conditioned environment, or under direct sunlight, maintain the appropriate humidity. Installation space ❏ Avoid locations in direct contact with air from air conditioners and locations with heat sources. This could dry the nozzles in the print head and cause clogging.
SC-P800 Series User’s Guide Introduction ❏ Store the printer after confirming that the print head has been capped (the print head is positioned at the far right). If the print head is left uncapped for a long time, the print quality may decline. ❏ When loading ink cartridges, be sure all colors are installed. The printer can only be used when all colors are installed. ❏ Do not move the print head by hand; otherwise, the printer may be damaged.
SC-P800 Series User’s Guide Introduction ❏ If you put the print outs in an album before they are completely dry, they may be blurred. Notes on handling paper Note the following points when handling and storing the paper. If the paper is not in good condition, print quality may decline. ❏ Do not use a dryer to dry the print outs. Check the manuals supplied with each paper. ❏ Prevent color distortion while displaying or storing the print outs by following the instructions in the paper’s manual.
SC-P800 Series User’s Guide Introduction Introducing the Supplied Software Contents of the Software Disc The following Windows only software can be found on the supplied software disc. See http://epson.sn for Mac OS X or if you do not have a disk drive. You need to install the printer driver to use this printer. For details on each software see Network Guide (PDF) or the online help.
SC-P800 Series User’s Guide Introduction ❏ Allows the user to execute printer maintenance functions to maintain print quality, and check the printer's status and so on. Summary of the Printer Driver The main functions of the printer driver are described below. Windows ❏ Converts print data received from applications into printable data and sends it to the printer. ❏ Allows the user to specify print settings such as the media type and paper size.
SC-P800 Series User’s Guide Basic Operations Basic Operations Loading Paper This printer provides four types of feeding methods. For cut sheets, the feeding methods vary depending on the media thickness. c❏ ❏ If the cut sheets are wavy or curled, flatten them before loading them in the printer. If wavy or curled cut sheets are loaded, this printer may not be able to detect the paper size or print correctly.
SC-P800 Series User’s Guide Basic Operations Displaying the Paper Setup Screen B Open and fully extend the paper support. C Press the front cover. When Paper Setup Display is set to On and paper is loaded correctly, the setup screen for paper type and paper size is automatically displayed. The default value for Paper Setup Display is On. See the following for more information on the setup items.
SC-P800 Series User’s Guide Basic Operations D Fully extend the output tray. Note: If A3 or larger paper is not fed correctly, use the paper support edge guide (a) shown in the following illustration. Extend the tray until you can see the line on the left-hand side of the first section of the tray. U “Unable to feed or eject paper.” on page 111 F E Pinch the edge guide and slide it to fit to the width of the paper. Load the paper vertically with the printable side face up.
SC-P800 Series User’s Guide Basic Operations A Turn on the printer. D Press the front cover. E Push the center of the front manual feed tray to pop it out. Important: c An error may occur if you perform the The front cover opens automatically when it is pressed. following operations during initialization movement. ❏ Extend the front manual feed tray. ❏ Load fine art media. B Open the rear support. C Fully extend the rear support.
SC-P800 Series User’s Guide Basic Operations F Load the paper vertically with the printable side face up. G While aligning the right edge of the paper with the guide on the right-hand side of the tray, slide the paper all the way into the printer, and pull back the paper until the leading edge touches the tray. H I When paper feeding is complete, check that the printer is not operating, and then close the front manual feed tray. J Fully extend the output tray.
SC-P800 Series User’s Guide Basic Operations U “Displaying the Paper Setup Screen” on page 24 C Press the front cover. D Push the center of the front manual feed tray to pop it out. E Load the paper vertically with the printable side face up. Note: To eject the paper, press Eject on the control panel's Home screen, and then follow the on-screen instructions. The front cover opens automatically when it is pressed. Loading Poster Board Use the front manual feed tray to load poster board.
SC-P800 Series User’s Guide Basic Operations H F Fully extend the output tray. Extend the tray until you can see the line on the left-hand side of the first section of the tray. While aligning the right edge of the paper with the guide on the right-hand side of the tray, slide the paper all the way into the printer, and pull back the paper until the leading edge touches the tray. When the paper is loaded correctly, the Paper Setup screen is displayed.
SC-P800 Series User’s Guide Basic Operations B Loading Roll Paper Tighten the 2 screws on the unit. For roll paper, attach the optional roll paper unit to the printer. Load roll paper on the spindle supplied with the unit, and then load the spindle into the unit. U “Supported Media” on page 118 Attaching the roll paper unit This section explains how to attach the optional roll paper unit.
SC-P800 Series User’s Guide Basic Operations U “Supported Media” on page 118 A Remove the black flange with the attachment from the spindle. B Push out the two hooks that fit into the flange. When the hooks have been released, you can remove the attachment. B Align the triangle marks on the attachment and the flange, and press until the hooks click into place. C In the same way, insert the attachment into the spindle first, and then attach it to the flange that is fixed to the spindle.
SC-P800 Series User’s Guide Basic Operations C Insert the spindle into the roll paper core. D Press the roll paper against the flange so that there is no gap between the flange attached to the spindle and the roll paper. E Press the black flange so that there is no gap between the flange and the roll paper. B Insert the spindle from the right so that the end of the roll paper is hanging down towards you. The front cover opens automatically when it is pressed.
SC-P800 Series User’s Guide Basic Operations C Only extend the second section of the output tray. E Load the spindle with the roll paper into the unit. F If the leading edge of the roll paper is curled, straighten it before inserting it in the printer. Load from the rear and make sure the gray (fixed) flange is on the left. If the leading edge is curled, the back of the paper may be soiled when printing.
SC-P800 Series User’s Guide Basic Operations B c IfImportant: you continue inserting the roll paper after When you press Cut, follow the instructions on the control panel's screen. the screen has changed, the margin at the leading edge will be more than 50 mm. I When the following screen is displayed, press Load. Removing Roll Paper When the paper is loaded correctly, the Paper Setup screen is displayed.
SC-P800 Series User’s Guide Basic Operations Basic Printing Methods Important: c Make sure the roll paper has been ejected and wound around the spindle when you remove the spindle. If you try to remove the spindle while roll paper is still being fed, the printer could be damaged. E This section explains how to print and how to cancel printing. Printing (Windows) Remove the black flange from the spindle.
SC-P800 Series User’s Guide Basic Operations D F Select the Media Type, Color, Print Quality, Mode, and Source according to the paper loaded in the printer. When settings are complete, click Print. The Progress Bar is displayed, and printing starts. E Screen while printing The following screen is displayed when you start printing, and the Progress Bar (the computer's processing status) is displayed.
SC-P800 Series User’s Guide Basic Operations Printing (Mac OS X) Note: If the page setting items are not displayed on the print screen, click File menu - Page Setup and so on in your application. You can make print settings such as paper size and paper feed from the connected computer and then print. A Turn on the printer, and load the paper. B When you have created the data, from the File menu of the application, click Print and so on.
SC-P800 Series User’s Guide Basic Operations Set the Media Type, Color, Print Quality, and other settings according to the type of paper loaded in the printer. Normally, you can print correctly just by setting items in the Print Settings screen. F Canceling Printing (Windows) When the computer has finished sending data to the printer, you cannot cancel the print job from the computer. Cancel on the printer. When settings are complete, click Print.
SC-P800 Series User’s Guide Basic Operations If the job has been sent to the printer, print data is not displayed on the above screen. Note: You cannot delete print jobs which are in the print queue on the computer using the above operation. See "Canceling Printing (Windows)" or "Canceling Printing (Mac OS X)" in the previous section for information on deleting print jobs from the print queue.
SC-P800 Series User’s Guide Basic Operations Printable area The printable area is shown in gray in the illustration below. Note, however, that owing to the design of the printer, print quality will drop in the areas with hatching. The arrow in the illustration indicates the direction of the ejected paper. Important: c The width of the margins may vary somewhat depending on how the paper is loaded and its elasticity.
SC-P800 Series User’s Guide Basic Operations B Changing the Type of Black Ink This printer allows you to set both photo black ink and matte black ink and switch between them depending on the paper type. Select the paper type from the Media Type menu. Depending on the media type you select, black ink is switched automatically during printing. Photo Black ink reduces the grainy feeling of photo papers giving them a smooth, professional finish.
SC-P800 Series User’s Guide Basic Operations The black ink type that can be used for printing varies depending on the media type. ❏ You can select the type of black ink from the printer driver when the media type selected supports both photo black and matte black. When Last-used is selected, you can print using the black ink settings made on the printer. This printer comes equipped with the following two types of power saving settings.
SC-P800 Series User’s Guide Basic Operations Windows U “Summary of the Utility Tab” on page 48 Mac OS X U “Epson Printer Utility 4 Functions” on page 51 About Power Management using Power Off Timer You can adjust the time before Power Management is applied. Any increase will affect the printer's energy efficiency. Please consider the environment before making any change.
SC-P800 Series User’s Guide Using the Printer Driver(Windows) The printer driver setting screen is displayed. Using the Printer Driver (Windows) Displaying the Settings Screen You can access the printer driver in the following ways: ❏ From Windows applications U “Printing (Windows)” on page 35 Make the necessary settings. These settings become the default settings of the printer driver.
SC-P800 Series User’s Guide Using the Printer Driver(Windows) Displaying Help Right-click on the item you want to check You can access the printer driver help in the following ways: Right-click the item, and then click Help. ❏ Click Help ❏ Right-click on the item you want to check Click the Help Button to Display By displaying help, you can use the contents page or keyword search to read the help.
SC-P800 Series User’s Guide Using the Printer Driver(Windows) C Customizing the Printer Driver Enter any name in the Name box, and then click Save. You can save the settings or change the display items as you prefer. Saving various settings as your Select Settings You can save all printer driver settings as a Select Setting. Additionally, in Select Setting the recommended settings for a variety of uses are already available. You can save up to 100 settings.
SC-P800 Series User’s Guide Using the Printer Driver(Windows) B Click Custom Settings. C Enter any name in the Name box, and then click Save. ❏ Arrange in groups (folders). A Go to the Utility tab and click Menu Arrangement. B Select Edit Item. C Order or group items in the List box. You can save up to 100 settings. You can choose a setting you have registered from the Media Type list box. Note: You can save the settings as a file by clicking Export.
SC-P800 Series User’s Guide Using the Printer Driver(Windows) ❏ Drag and drop unnecessary items to Not Display. Summary of the Utility Tab You can perform the following maintenance functions from the printer driver's Utility tab. Note: When Delete Group is performed, the group (folder) is deleted, however the items in the deleted group (folder) remain. D Click Save. Nozzle Check This function prints a nozzle check pattern to check whether the print head nozzles are clogged.
SC-P800 Series User’s Guide Using the Printer Driver(Windows) EPSON Status Monitor 3 You can check the printer's status, such as the remaining ink level and error messages, from the computer's screen. Printer and Option Information You can set the time to automatically turn off the printer from Power Off Timer. Speed and Progress You can set various functions for printer driver basic operations.
SC-P800 Series User’s Guide Using the Printer Driver(Windows) D Uninstalling the printer driver Select the target printer icon, and then click OK. Follow the instructions below to uninstall the printer driver. c ❏Important: You must log in with an Administrator account. ❏ In Windows 7/Windows Vista, if an Administrator password or confirmation is requested, enter the password and then continue with the operation. A Turn off the printer, and unplug the interface cable.
SC-P800 Series User’s Guide Using the Printer Driver(Mac OS X) Using Epson Printer Utility 4 Using the Printer Driver (Mac OS X) You can perform maintenance tasks such as Nozzle Check or Head Cleaning by using Epson Printer Utility 4. This utility is installed automatically when you install the printer driver. Displaying the Settings Screen Starting Epson Printer Utility 4 The display method of the printer driver setting screen may differ depending on the application or the OS version.
SC-P800 Series User’s Guide Using the Printer Driver(Mac OS X) You can set the time to automatically turn off the printer from Power Off Timer. EPSON Status Monitor You can check the printer's status, such as the remaining ink level and error messages, from the computer's screen. Nozzle Check This function prints a nozzle check pattern to check whether the print head nozzles are clogged. If the pattern is blurred or there are gaps, preform head cleaning to clear the clogging.
SC-P800 Series User’s Guide Using the Printer Driver(Mac OS X) Uninstalling the printer driver When reinstalling the printer driver or upgrading, remove the target software first. Use the "Uninstaller" to remove the printer driver. Acquiring the Uninstaller You can download the "Uninstaller" from the Epson homepage. http://www.epson.com/ Using the Uninstaller Follow the steps provided when you acquire the "Uninstaller".
SC-P800 Series User’s Guide Printing Varieties Printing Varieties Note: For information on the operating systems supported by each application, visit the distributor’s website. Auto Correct Color and Print Photos (PhotoEnhance) Setting example for Adobe Photoshop CS5 Open the Print screen. Select Color Management and then Document. Select Printer Manages Colors as the Color Handling setting, and then click Print.
SC-P800 Series User’s Guide Printing Varieties C Select Color Management and then Document. Select Printer Manages Colors as the Color Handling setting, and then click Print. On the PhotoEnhance screen, you can set effects to apply to the print data. See the printer driver help for more details on each item. D Check other settings, and then start printing. Making Settings for Mac OS X When using applications featuring a color management function, specify how to adjust colors from these applications.
SC-P800 Series User’s Guide Printing Varieties C Select Print Settings from the list, select PhotoEnhance for Color Settings, and click Advanced Color Settings. Correct color and print The printer driver automatically and internally corrects colors to match the color space. You can select from the following color correction modes. ❏ EPSON Standard (sRGB) Optimizes the sRGB space and corrects the color. ❏ Adobe RGB Adobe RGB Optimizes the sRGB space and corrects the color.
SC-P800 Series User’s Guide Printing Varieties C Open the Print screen. Select Color Management and then Document. Select Printer Manages Colors as the Color Handling setting, and then click Print. B If you opted to display the Color Controls screen in Step 2, adjust settings as desired. See the printer driver help for more details on each item. Note: You can adjust the correction value by checking the sample image on the left side of the screen.
SC-P800 Series User’s Guide Printing Varieties Setting example for Adobe Photoshop CS5 Note: EPSON Color Controls is unavailable unless the setting in step 1 is made for the following applications. Open the Print screen. Select Color Management and then Document. Select Printer Manages Colors as the Color Handling setting, and then click Print. D B Display the Print screen. C Select Color Matching from the list, and then click EPSON Color Controls.
SC-P800 Series User’s Guide Printing Varieties E Make the necessary settings. Printing Black and White Photos See the printer driver help for more details on each item. You can print black and white photos with rich gradation by adjusting the image data color by the printer driver. The original data is not affected. You can correct image data when printing without processing the data from applications. Note: It is recommended that you use images with a color space of sRGB.
SC-P800 Series User’s Guide Printing Varieties Select Color Management and then Document. Select Printer Manages Colors or No Color Management as the Color Handling setting, and then click Print. B Display the printer driver Main tab and select Advanced B&W Photo as the Color. C Click Advanced for Mode. D Make the necessary settings. E Check other settings, and then start printing. See the printer driver help for more details on each item.
SC-P800 Series User’s Guide Printing Varieties B In other applications, set No Color Management. Note: For information on the operating systems supported by each application, visit the distributor’s website. Display the Print screen, select Print Settings from the list, and then select Advanced B&W Photo as the Color. U “Printing (Mac OS X)” on page 37 Setting example for Adobe Photoshop CS5 Open the Print screen. Select Color Management and then Document.
SC-P800 Series User’s Guide Printing Varieties D Make the necessary settings. Borderless printing See the printer driver help for more details on each item. You can print your data without margins on the paper. The types of borderless printing you can choose vary as shown below depending on the media type. Cut sheets: No margins for all edges Roll paper: No margins for the left and right When performing left and right borderless printing, margins appear on the top and bottom of the paper.
SC-P800 Series User’s Guide Printing Varieties Retain Size Create the print data larger than the paper size in the applications to produce borderless output. The printer driver does not enlarge the image data. Use settings such as Page Layout in the applications to set the size of the image data as follows. - When printing on cut sheets, print data is created so that 5 mm (a total of 10 mm) extends in all directions beyond the actual paper size.
SC-P800 Series User’s Guide Printing Varieties Setting Procedures for Printing Supported paper sizes A4 (210 × 297 mm) A2 (420 × 594 mm) Adjusting Settings in Windows When the printer driver's Main screen is displayed, you can configure various settings required for printing such as Media Type, Source, Size. Letter (8½ × 11 in.) U “Printing (Windows)” on page 35 A A3 (297 × 420 mm) A3+ (329 × 483 mm) 28 × 43 cm (11 × 17 in.) 43 × 56 cm (17 × 22 in.) 100 × 148 mm 9 × 13 cm (3.5 × 5 in.
SC-P800 Series User’s Guide Printing Varieties C Making Settings for Mac OS X Open the Print screen and select the paper size from the Paper Size option, and then select a borderless printing method. Select Auto Expand or Retain Size as the Method of Enlargement. If you select Auto Expand, set how much of the image goes beyond the edge of the paper as shown below. A U “Printing (Mac OS X)” on page 37 Max Mid is half of the Max, and Min is a quarter of the Max.
SC-P800 Series User’s Guide Printing Varieties Top edge Bottom edge Left and right Sizes larger than A3+ Approx. 3.3 mm Approx. 5.0 mm Approx. 4.5 mm Sizes larger than A4 Approx. 3.0 mm Approx. 4.5 mm Approx. 3.5 mm A4 or smaller sizes* Approx. 3.0 mm Approx. 4.0 mm Approx. 2.5 mm 100 × 148 mm Approx. 1.3 mm Approx. 2.5 mm Approx. 2.5 mm C Select Print Settings from the list, and then set the Media Type. D Check other settings, and then start printing. 9 × 13 cm (3.5 × 5 in.
SC-P800 Series User’s Guide Printing Varieties Enlarged/Reduced Printing Fit to Page/Scale to fit paper size Adjusting Settings in Windows When the printer driver's Page Layout screen is displayed, set the same paper size as the data's paper size in Page Size or Paper Size. A You can enlarge or reduce the size of your data. There are three setting methods. U “Printing (Windows)” on page 35 ❏ Fit to Page printing Automatically enlarges or reduces the image to fit the paper.
SC-P800 Series User’s Guide Printing Varieties Making Settings for Mac OS X Open the Print screen, select Paper Handling from the list, and then check Scale to fit paper size. Fit to Roll Paper Width (Windows only) A A U “Printing (Mac OS X)” on page 37 Display the printer driver Main tab and select Roll Paper for Source. U “Printing (Windows)” on page 35 B B Display the Page Layout tab and choose a Paper Size that matches the page size used in the document size.
SC-P800 Series User’s Guide Printing Varieties D E Select the scale within a range of 10 to 650 %. Select the width of the roll paper loaded in the printer from the Roll Width list. D Check other settings, and then start printing. Making Settings for Mac OS X When the Print screen is displayed, select the size of the paper loaded in the printer from the Paper Size list.
SC-P800 Series User’s Guide Printing Varieties B Enter the scale. Multi-Page Printing You can print multiple pages of your document on one sheet of paper. If you print continuous data prepared at A4 size, it is printed as shown below. Note: ❏ In Windows, you cannot use the Multi-Page printing function when performing borderless printing. ❏ In Windows, you can use the reduce/enlarge function (Fit to Page) to print the data on different sizes of paper.
SC-P800 Series User’s Guide Printing Varieties Adjusting Settings in Windows When the printer driver's Page Layout screen is displayed, select the Multi-Page check box, select N-up, and then click Settings. Making Settings for Mac OS X When the Print screen is displayed, select Layout from the list, and then specify the number of pages per sheet and so on.
SC-P800 Series User’s Guide Printing Varieties U “Printing (Windows)” on page 35 Manual Double-Sided Printing (Windows only) You can easily print on both sides of the paper by printing out all even numbered pages and then flipping those pages over and reloading them manually to print the odd numbered pages. Cautions when Performing Double-Sided Printing When performing double-sided printing, note the following points. ❏ Use paper that supports double-sided printing.
SC-P800 Series User’s Guide Printing Varieties Poster Printing (Enlarge to cover several sheets and print - Windows only) Setting Procedures for Printing The poster printing function automatically enlarges and divides the print data. You can join the printed sheets to create a large poster or calendar. Poster printing is available up to 16-fold (four sheets by four sheets) of normal printing size. There are two ways to print posters. A Prepare the print data using applications.
SC-P800 Series User’s Guide Printing Varieties D Select borderless poster printing or poster printing with margins, and then select any pages that you do not want to print. Note: Regarding the size after joining together: When Borderless Poster Print is cleared and printing with margins is selected, the Print Cutting Guides items are displayed. When borderless is selected: Select Borderless Poster Print. The finished size is the same whether or not Trim Lines is selected.
SC-P800 Series User’s Guide Printing Varieties Joining the output paper together The steps for joining the output paper together differ between borderless poster printing and poster printing with margins. Borderless poster printing This section describes how to join four printed pages together. Check and match the printed pages, and join them in the order indicated below using an adhesive tape on the back of the sheets. The following describes how to join four printed pages together.
SC-P800 Series User’s Guide Printing Varieties D Join the left and right sheets together. E Repeat steps 1 to 4 for the lower sheets. F Cut the bottom of the upper sheets along the alignment marks (horizontal blue line). G Lay the upper sheet on top of the lower sheet. Lineup the X marks as shown in the illustration below, and temporarily fasten them using an adhesive tape on the back. Use an adhesive tape to stick the backs of the sheets together.
SC-P800 Series User’s Guide Printing Varieties Adjusting Settings in Windows When the printer driver's Main screen is displayed, click User Defined. User-defined Paper Sizes/ Custom Paper Sizes A U “Printing (Windows)” on page 35 You can also print on paper sizes that are not already available in the printer driver. User-defined paper sizes that have created and saved as described below can be selected using the application page setup option.
SC-P800 Series User’s Guide Printing Varieties C Note: ❏ To change the paper size you saved, select the paper size name from the list on the left. C ❏ To delete the user-defined size you saved, select the paper size name from the list on the left, and then click Delete. ❏ You can save up to 100 paper sizes. Enter the Width, Height for the Paper Size, and enter the margins, and then click OK. You can set the page size and printer margins depending on the printing method. Click OK.
SC-P800 Series User’s Guide Printing Varieties You can now print as normal. Banner printing (on roll paper) You can print banners and panoramic pictures if you create and set print data for banner printing in your application. You need the optional roll paper unit to load roll paper. U “Consumables and Optional Items” on page 117 There are two ways to print a banner.
SC-P800 Series User’s Guide Printing Varieties C Adjusting Settings in Windows In the printer driver's Main screen, select Media Type. A Note: If you are using applications that support banner printing, you do not need to set User Defined Paper Size if you select Roll Paper (Banner) as the Source. U “Printing (Windows)” on page 35 B Click User Defined and match the paper size to the size of the data if necessary. D Make sure the Optimize Enlargement check box is selected.
SC-P800 Series User’s Guide Printing Varieties U “Printing (Mac OS X)” on page 37 Layout Manager (Windows only) The Layout Manager function allows you to place multiple pieces of print data created in different applications on the paper freely and print them at once. You can create a poster or display material by placing multiple pieces of print data where you like. Also, Layout Manager allows you to use paper effectively. B Check other settings, and then start printing.
SC-P800 Series User’s Guide Printing Varieties Placing the same data B Open the file you want to print in your application. C Select Layout Manager in the Main tab of the printer driver and choose an option for Size that matches the size of the document created in the application. U “Printing (Windows)” on page 35 Placing data freely Note: The option selected for Size is the size used in the Layout Manager. The actual printing paper size is set in the screen in step 7.
SC-P800 Series User’s Guide Printing Varieties F H Arrange the objects on the Layout Manager screen. You can drag objects to move and resize them, use tool buttons and the Object menu to align and rotate objects on the Layout Manager screen. Click the File menu on the Layout Manager screen, and then click Print. Printing starts. Saving and Calling Layout Manager Settings You can resize and replace whole objects in the Preference or Arrangement Settings screens.
SC-P800 Series User’s Guide Printing Varieties Using Epson iPrint Launch Epson iPrint on your smart device, and then select the item you want to use from the following Home screen. Printing from a Smart Device The following screen may change without notice. Using Epson iPrint Epson iPrint is an application that allows you to print photos, Web pages, documents, and so on from smart devices such as smart phones and tablets.
SC-P800 Series User’s Guide Printing Varieties F The selected photos or documents are displayed. G Printing starts. Note: When printing from the document menu in iPhone, iPad, or iPod touch, send the document you want to print using the iTunes file sharing function, and then launch Epson iPrint. Using AirPrint For iOS devices using the latest iOS, or computers later than Mac OS X v10.7.x, you can print wirelessly using this printer.
SC-P800 Series User’s Guide Color Management Printing Color Management Print Settings Color Management Printing You can perform color management printing using this printer's printer driver in the following two ways. About Color Management Choose the best method according to the application you are using, the operating system environment, the aim of the print out and so on.
SC-P800 Series User’s Guide Color Management Printing Setting color management with the applications Setting profiles Settings for the input profile, printer profile, and intent (matching method) vary between three types of color management printing since their color management engines are used differently. This is because color management usage differs between the engines. Make settings in the printer driver or application as described in the following table.
SC-P800 Series User’s Guide Color Management Printing C Set color management to off. Setting color management with the printer driver For Windows In the Main screen, select Custom as the Mode setting, and select Off (No Color Adjustment). Color management printing by Host ICM (Windows) Use image data in which an input profile has been embedded. Also, the application must support ICM. A Make the settings for color adjustment using the application.
SC-P800 Series User’s Guide Color Management Printing C Setting example for Adobe Photoshop CS5 Open the Print screen. Select Color Management and then Document. Select Printer Manages Colors as the Color Handling setting, and then click Print. Select Host ICM. When Epson special media is selected from Media Type in the Main screen, the printer profile corresponding to the media type is automatically selected and displayed in the Printer Profile Description box.
SC-P800 Series User’s Guide Color Management Printing C Select Color Matching from the list, and then click ColorSync. Application Color Management Settings Adobe Photoshop CS3 or later Printer Manages Colors Adobe Photoshop Lightroom 1 or later Adobe Photoshop Elements 6 or later Other applications No Color Management Note: For information on the operating systems supported by each application, visit the distributor’s website. D Check other settings, and then start printing.
SC-P800 Series User’s Guide Color Management Printing A In the printer driver's Main screen, select Custom as the Mode, select ICM, and then click Advanced. U “Printing (Windows)” on page 35 B Intent Explanation Absolute Colorimetric Assigns absolute color gamut coordinates to the original and print data and converts the data. Therefore, color tone adjustment is not performed on any white point (or color temperature) for the original or print data.
SC-P800 Series User’s Guide Using the Control Panel C Using the Control Panel Press an item to select it. Note: / , and then Depending on the item, press swipe the screen to change the item displayed. Press the icons to display menus such as Settings and Checking. U “Home Screen View” on page 13 Menus Using the Menu Explanations in this section use the Setup menu as an example. A Press the B Press F. button.
SC-P800 Series User’s Guide Using the Control Panel Setting Items for the Network Summary Display The following items can be set from the network summary display. Item Menu Content Wi-Fi/Network Settings See the Network Guide (PDF). Wi-Fi Setup Wi-Fi Direct Setup Wi-Fi Setup See the Network Guide (PDF). Setting Items for the Setup Menu The Setup menu contains the following items and parameters. * indicates the default setting.
SC-P800 Series User’s Guide Using the Control Panel Item Maintenance Content Print Head Nozzle Check Check whether the print head nozzles are clogged. Visually confirm the printed check pattern, and perform head cleaning if there are any blurred or missing sections. U “Checking for clogged nozzles” on page 98 Print Head Cleaning Perform head cleaning if you notice banding or gaps in the print results. Cleans the surface of the print head to improve the print quality.
SC-P800 Series User’s Guide Using the Control Panel System Administration * indicates the default setting. Item Printer Settings Parameter Paper Source Settings Content Paper Setup Display On* Off Error Notice On Off* Paper Skew Check On* Automatically displays the media setup screen when paper is loaded. When this is Off, AirPrint is unavailable. Also, Error Notice from Paper Source Settings becomes Off.
SC-P800 Series User’s Guide Using the Control Panel Item Common Settings Parameter Content LCD Brightness 1-9 (9*) You can adjust the brightness of the screen in nine stages. Sound Button Press High* Medium Set whether or not to play a sound and the volume for operation sounds, error sounds, and done sounds. Low Off Error Notice High* Medium Low Off Completion Notice High* Medium Low Off Sleep Timer 1 to 240 mins.
SC-P800 Series User’s Guide Using the Control Panel Item Wi-Fi/Network Settings Parameter Content Wi-Fi/Network Status - Print a network status sheet. View network settings and connection status. Wi-Fi Setup Manual See the Network Guide (PDF). Push Button Setup (WPS) PIN Code Setup (WPS) Wi-Fi Auto Connect Disable Wi-Fi Wi-Fi Direct Setup Connection Check - See the Network Guide (PDF). Advanced Setup Printer Name See the Network Guide (PDF).
SC-P800 Series User’s Guide Maintenance Maintenance From the computer Print Head Maintenance Use Epson Printer Utility 4 for Mac OS X. Explanations in this section use the Windows printer driver as an example. U “Epson Printer Utility 4 Functions” on page 51 You need to adjust the print head if white lines appear in your print outs or if you notice the print quality has declined.
SC-P800 Series User’s Guide Maintenance D ❏ If clogging remains even after performing Heavy Head Cleaning, turn off the printer and do not use it for at least one night. Leaving the cartridges undisturbed for a period of time may allow the ink that is causing the clog to dissolve. Check the results. Review the printed nozzle check pattern while referring to the following section. Example of clean nozzles If the nozzles are still clogged, contact your dealer or Epson Support.
SC-P800 Series User’s Guide Maintenance B B Press F - Maintenance - Print Head Cleaning or Heavy Head Cleaning. Further instructions are displayed in the control panel’s screen. Click Print Head Alignment from the Utility tab in the printer driver’s Properties (or Print Settings) screen. Follow the on-screen instructions.
SC-P800 Series User’s Guide Maintenance E Look at #1 and check for the pattern with the least vertical lines. Replacing Consumables In this example, you would choose "4". Replacing Ink Cartridges If one of the installed ink cartridges is expended, printing cannot be performed. If an ink low warning is displayed, we recommend replacing the ink cartridge(s) as soon as possible. If an ink cartridge runs out while printing, you can continue printing after replacing the ink cartridge.
SC-P800 Series User’s Guide Maintenance D Press Open ink cover. E Open the ink cartridge cover. G The ink cartridge cover lock is released, and the cover rises approximately 8 mm. Pull out the ink cartridge. Important: c Removed ink cartridges may have ink around the ink supply port, so be careful not to get any ink on the surrounding area. H Remove the ink cartridge from the bag, and shake it for approximately five seconds as shown in the illustration.
SC-P800 Series User’s Guide Maintenance I Insert the new ink cartridge. Push the cartridge in until it clicks into place. B Open the maintenance cartridge cover. C Remove the new maintenance cartridge from the package. Repeat steps 6 to 9 to replace other ink cartridges. Important: c Install all ink cartridges. You cannot print if one or more colors of ink cartridge are not inserted. J Important: c Do not touch the area shown in the illustration.
SC-P800 Series User’s Guide Maintenance E Place the old maintenance cartridge in the bag supplied with the new cartridge, and then seal the bag. Cleaning the Printer To keep the printer in optimum operating condition, make sure you clean it periodically (about once a month). Cleaning the Printer Surface F A Remove the paper from the printer. B Turn off the printer, check that the screen display has turned off, and then unplug the printer. C Use a soft cloth to wipe off any dirt and dust.
SC-P800 Series User’s Guide Maintenance Cleaning Inside the Printer A Turn off the printer, check that the screen display has turned off, and then unplug the printer. B Unplug the power plug, and then wait for approximately one minute. C Open the printer cover, and then use a soft cloth to wipe off any dirt and dust. Carefully wipe the light blue areas (a) shown in the following illustration.
SC-P800 Series User’s Guide Problem Solver Problem Solver Messages If one of the following messages is displayed in the control panel’s screen, refer to the solutions listed here and perform the necessary steps to fix the problem. Message What to do Printer error. Turn power off and then on again. For details, see your documentation. Turn off the printer, and then turn it back on.
SC-P800 Series User’s Guide Problem Solver Cannot Print from the Printer Driver Troubleshooting o Is the cable plugged in properly? Make sure the printer's interface cable is securely plugged into the correct terminal of the computer and the printer. Also, make sure the cable is not broken nor bent. If you have a spare cable, try connecting with the spare cable. You cannot print (because the printer does not work) The printer does not turn on.
SC-P800 Series User’s Guide Problem Solver o Does the printer port setting match the printer connection port? (Windows) o Display the screen that indicates the printer's status, and check that printing is not paused. Check the printer port. (1) From the Apple menu, click Print & Scan (or Print & Fax), and then click Open Print Queue. Click the Ports tab in the printer driver’s Properties screen, and check the Print to the following port(s).
SC-P800 Series User’s Guide Problem Solver Print Quality/Print Results o The print quality may decline when you select Speed for Print Quality or make Quality Options settings that assign priority to speed from the printer driver. If you want to improve your print quality, select a setting that assigns priority to quality. Print quality is poor, uneven, too light, or too dark.
SC-P800 Series User’s Guide Problem Solver The print is not positioned properly on the paper. o o Cut sheets become wavy or slack due to changes in temperature or humidity which may result in the printer being unable to recognize the paper size correctly. Flatten the paper before loading it in the printer, or use new paper. Have you specified the print area? Check the print area in the settings of the application and the printer.
SC-P800 Series User’s Guide Problem Solver o Unable to feed or eject paper. Did you shake the ink cartridge before installing it in the printer? The printer uses pigment inks, which require that the ink inside the cartridge be mixed before the cartridge is installed. o Is the paper loaded in the correct position? See the following for the correct paper loading positions.
SC-P800 Series User’s Guide Problem Solver o A Is paper jammed in the printer? Open the printer cover of the printer and check that there are no paper jams or foreign objects in the printer. If paper is jammed, see below and clear the jammed paper. o Did you leave the front manual feed tray open when loading roll paper? Close the front manual feed tray, and load roll paper. o Fine art media may have been fed on an angle.
SC-P800 Series User’s Guide Problem Solver B Open the printer cover and slowly pull the jammed paper out of the printer. Jammed Fine Art Media Follow the instructions on the control panel's screen, and remove any jammed paper by following the steps below. A C After removing the paper, close the printer cover and press Resume. D If an error is still displayed after you have completed Step 3, turn off the printer, and then turn it back on.
SC-P800 Series User’s Guide Problem Solver B Open the printer cover and slowly pull the jammed paper out of the printer. C After removing the paper, close the printer cover and press Resume. D If an error is still displayed after you have completed Step 3, turn off the printer, and then turn it back on. E If you are unable to remove the paper, contact your dealer or Epson Support.
SC-P800 Series User’s Guide Problem Solver B Open the printer cover and slowly pull the jammed paper out of the printer. C After removing the paper, close the printer cover and press Resume. D If an error is still displayed after you have completed Step 3, turn off the printer, and then turn it back on. E If you are unable to remove the paper, contact your dealer or Epson Support.
SC-P800 Series User’s Guide Problem Solver C Color ink runs out quickly even when printing in the Black mode or when printing black data. Open the printer cover and slowly pull the jammed paper out of the printer. o Color ink is consumed during the head cleaning process. All nozzles are cleaned during head cleaning, using all colors of ink. (Even when Black mode is selected, the ink for all colors is consumed while cleaning.
SC-P800 Series User’s Guide Appendix Appendix Consumables and Optional Items The following consumables and optional items can be used with this printer. (Current as of January, 2015) For the latest information, see the Epson Web site.
SC-P800 Series User’s Guide Appendix Model name Product name SC-P808 Ink cartridges (80 ml) Product number Photo Black T8511 Cyan T8512 Vivid Magenta T8513 Yellow T8514 Light Cyan T8515 Vivid Light Magenta T8516 Light Black T8517 Matte Black T8518 Light Light Black T8519 * Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of non-genuine ink.
SC-P800 Series User’s Guide Appendix ❏ ICC Profile: Describes the ICC profile for the media. The file name of the profile is used as the profile name in the printer driver or the application. ❏ Media Type: Describes the media type selected in the printer driver. ❏ Size: Describes the size for cut sheet media or the width for roll paper. ❏ Capacity: Describes how many sheets can be loaded in the auto sheet feeder. For cut sheets only. ❏ Source: Describes the source from which paper is loaded.
SC-P800 Series User’s Guide Appendix Premium Semigloss Photo Paper ICC Profile: SC-P800 Series Epson Premium Semigloss.icc Media Type (Printer Driver) Size Capacity Source Borderless Black ink Epson Premium Semigloss 10 x 15 cm (4 x 6 in.) 30 Auto sheet feeder ✓ PK A4 30 A3 10 A3+ A2 1 Archival Matte Paper ICC Profile: SC-P800 Series Epson Archival Matte.
SC-P800 Series User’s Guide Appendix Media Type (Printer Driver) Size Capacity Source Borderless Black ink Watercolor Paper RadiantWhite A3+ 1 Front manual feed (fine art media) ✓ MK Velvet Fine Art Paper ICC Profile: SC-P800 Series VelvetFineArtPaper.icc Media Type (Printer Driver) Size Capacity Source Borderless Black ink Velvet Fine Art Paper A3 1 Front manual feed (fine art media) ✓ MK A3+ A2 UltraSmooth Fine Art Paper ICC Profile: SC-P800 Series UltraSmooth FineArt Paper.
SC-P800 Series User’s Guide Appendix Roll paper All paper loading methods are for roll paper. U “Loading Roll Paper” on page 30 Premium Glossy Photo Paper (250) ICC Profile: SC-P800 Series Epson Premium Glossy.icc Media Type (Printer Driver) Size Core Borderless Black ink Epson Premium Glossy 406 mm/16" 3 inch ✓ PK Premium Semigloss Photo Paper (250) ICC Profile: SC-P800 Series Epson Premium Semigloss.
SC-P800 Series User’s Guide Appendix c ❏Important: Do not use paper that is wrinkled, scuffed, torn, or dirty. ❏ Although plain paper and recycled paper manufactured by other companies can be loaded and fed in the printer as long as they meet the following specifications, Epson cannot guarantee the print quality.
SC-P800 Series User’s Guide Appendix Thick paper Cut sheets (paper thickness 0.29 to 0.7 mm) Driver Media Types Size Number of Sheets Loading Method Borderless Ink Type See the manual supplied with the paper and adjust settings as appropriate. A4 1 Front manual feed tray (fine art media) ✓*1 PK/MK Letter Legal - Half Letter ✓*1 28 × 43 cm (11 × 17 in.) 43 × 56 cm (17 × 22 in.) JIS B4 - JIS B3 ✓*1 254 × 305 mm (10 × 12 in.) A3 A3+ 279 × 356 mm (11 × 14 in.) 30 × 30 cm (12 × 12 in.
SC-P800 Series User’s Guide Appendix Cut sheets (paper thickness 1.2 to 1.5 mm) Driver Media Types Size Number of Sheets Loading Method Borderless Ink Type See the manual supplied with the paper and adjust settings as appropriate. A4 1 Front manual feed tray (poster board) - PK/MK Letter Legal Half Letter 28 × 43 cm (11 × 17 in.) 43 × 56 cm (17 × 22 in.) JIS B4 JIS B3 254 × 305 mm (10 × 12 in.) A3 A3+ 279 × 356 mm (11 × 14 in.) 30 × 30 cm (12 × 12 in.) 36 × 43 cm (14 × 17 in.
SC-P800 Series User’s Guide Appendix Roll paper Paper thickness: 0.25 to 0.7 mm Driver Media Types Size Roll Core Size Borderless Ink Type See the manual supplied with the paper and adjust settings as appropriate. 13 to 17 inches wide 2 inches/3 inches ✓*1 PK/MK W: 329 to 431.8 mm L: 55 to 1117.6 mm*2 *1 You can specify and perform borderless printing; however, the print quality may decline or margins may appear due to the paper expanding or contracting.
SC-P800 Series User’s Guide Appendix Notes on Moving and Transporting Preparing the Printer for Transport Note the following points when moving or transporting the printer. To protect the printer from shock and vibration when transporting, attach protective material to the printer using commercially available tape, and repack it the same way it was packed when purchased.
SC-P800 Series User’s Guide Appendix D F Put commercially available tape on the protective material for transportation, and then secure it in the bottom gap on the front manual feed. Keeping the printer flat, pack it in Styrofoam or other protective material and place it in the box. Notes Before Using the Printer Again Before using the printer for the first time after moving or transport, check that the print head is not clogged.
SC-P800 Series User’s Guide Appendix Specifications Table Printer Specifications External dimensions Storage dimensions: (W) 684×(D)376×(H) 250mm Printer Specifications Printing method On-demand ink jet Nozzle configuration Black: 180 nozzles x 3 colors (Photo Black, Matte Black, Light Black, Light Light Black) Normal dimensions: (W) 684×(D) 963×(H) 550mm When optional items are attached Storage dimensions: (W) 684×(D) 586×(H) 286mm Normal dimensions: (W) 684×(D) 769×(H) 286mm Color: 180 nozzles x
SC-P800 Series User’s Guide Appendix Network Supported operating systems Wireless LAN Wired LAN Standard: IEEE 802.11b/g/n Security: WPA-PSK (TKIP/AES) WPA2 compliant, WEP (64/128bit) Frequency Band: 2.4 GHz Communicati on Mode: Infrastructure, ad hoc*1 Standard: Windows Vista/Windows Vista x64 Windows 7/Windows 7 x64 Windows 8/Windows 8 x64 Windows 8.1/Windows 8.1 x64 Mac OS X 10.6.8/10.7.x/10.8.x/10.9.x/10.10.x Standards and Approvals Wi-Fi Direct*2 U.S.
SC-P800 Series User’s Guide Appendix This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
SC-P800 Series User’s Guide Where To Get Help Where To Get Help Contacting Epson Support Technical Support Web Site Before Contacting Epson If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting information in your product documentation, contact Epson support services for assistance. If Epson support for your area is not listed below, contact the dealer where you purchased your product.
SC-P800 Series User’s Guide Where To Get Help Help for Users in North America Help for Users in Europe Epson provides the technical support services listed below. Check your Pan-European Warranty Document for information on how to contact Epson support. Internet Support Help for Users in Taiwan Visit Epson’s support website athttp://epson.com/ support and select your product for solutions to common problems.
SC-P800 Series User’s Guide Where To Get Help Telephone number Fax number Address Your Dealer 03-4393119 03-4396589 5F., No.2, Nandong Rd., Pingzhen City, Taoyuan County 32455, Taiwan (R.O.C.) Don’t forget that your dealer can often help identify and resolve problems. The dealer should always be the first call for advise on problems; they can often solve problems quickly and easily as well as give advise on the next step to take. 03-5325077 03-5320092 1F., No.9, Ln. 379, Sec. 1, Jingguo Rd.
SC-P800 Series User’s Guide Where To Get Help Service Center: World Wide Web (http://www.epson.com.sg) Information on product specifications, drivers for download, Frequently Asked Questions (FAQ), Sales Enquiries, and Technical Support via e-mail are available. 80 Truong Dinh Street, District 1, Hochiminh City Vietnam Help for Users in Indonesia Contacts for information, support, and services are: Epson HelpDesk (Phone: (65) 6586 3111) World Wide Web (http://www.epson.co.
SC-P800 Series User’s Guide Where To Get Help Yogyakarta Hotel Natour Garuda Jl. Malioboro No. 60 Yogyakarta Help for Users in Malaysia Contacts for information, support, and services are: Phone: (62) 274-565478 Medan World Wide Web (http://www.epson.com.my) Wisma HSBC 4th floor Jl. Diponegoro No. 11 Medan ❏ Information on product specifications, drivers for download Phone/fax: (62) 61-4516173 Makassar ❏ Frequently Asked Questions (FAQ), Sales Enquiries, questions through e-mail MTC Karebosi Lt.
SC-P800 Series User’s Guide Where To Get Help Information on product specifications, drivers for download, Frequently Asked Questions (FAQ), and E-mail Enquiries are available.
