Installation manual

2-4 Configuring Printer Driver Settings Rev. F
Printer Color Specification
Select “Color” or “Black,” whichever is appropriate for your printer model.
❏ For color model: Select “Color.”
❏ For monochrome model: Select “Black.”
Note:
❏ Always select a color option according to the option specified for the printer. If the selected color
option does not match the option specified for the printer, the printer does not print normally.
❏ When you have changed the printer color specification, the following message appears. Please make
sure that the printer color specification is correct. Clicking [OK] enables the change.
❏ When you change the printer color option on this tab, the following settings on the [Main] tab are also
changed.
• Medias type (see “Media Type” on page 2-5)
• Color (see “Color” on page 2-6)
• Mode (see “Mode” on page 2-6)