Installation manual

2-6 Configuring Printer Driver Settings Rev. F
Color
Specify either “Color” or “Monochrome” for printing.
❏ For color model: You can select “Color” or “Monochrome.”
❏ For monochrome model: The color is set to “Monochrome” and cannot be changed.
Note:
If the correct color options for the printer color specification of your printer are not displayed, the printer
color specification setting on the [Option settings] tab is incorrect. Set it correctly, referring to “Printer
Color Specification” on page 2-4, and then select the color.
Mode
Specify the printing modes.
❏ Quality or speed: Select “Quality” or “Speed.” Selecting “Quality”gives better print
results, but it reduces the print speed.
• For color model: You can select “Quality” or “Speed.”
• For monochrome model:The mode is set to “Speed” and cannot be changed.
• Brightness: This setting affects mainly the midtones and does not affect the bright
(highlight) and dark (shadow) parts as much.
• For color model: You can set to the three levels of brightness, “Bright,” “Medium
(center),” or “Dark.”
• For monochrome model:The mode is set to “Medium (center)” and cannot be changed.
Ink Information
Gives information about the level of ink remaining in the printer.
Note:
The ink information does not appear in the following cases.
• When the printer is offline.
• When the EPSON Status Viewer is not running. (See “Starting and stopping the EPSON Status
Viewer” on page 3-8.)
Print Preview
If you select the “Print Preview” check box, you can use the preview screen to check the print
image before printing actually starts. For information on the print preview screen, see “Using
the Print Preview Screen” on page 2-13.