Installation manual

Rev. F Configuring Printer Driver Settings 2-9
TM-C100 Printer Driver Operation Manual
Paper settings screen
If the set paper size/page size is larger than the printable area of the paper source setting (see
“Paper Source” on page 2-7), the following screen appears.
Select the output paper size and click [OK] to enable the Fit to Page feature.
(Fit to Page feature: Reduces the print result to fit the output paper size.)
Specifying a user defined paper size
When you select “User Defined Size” as the paper size, the following screen appears.
1. Enter a name for this user defined paper size.
2. Enter the width and length of the paper. If you change the unit, the entered numbers are
adjusted automatically to the new unit. The range of sizes of paper that you can specify for
the each paper source are listed in the following table.
3. Click [Save]. The user-defined paper size name, width, and length are saved.
Manual Auto Sheet Feeder Roll Paper
Paper width
(Lower: default)
193-850
(394)
193-531
(394)
178-413
(299)
Paper length
(Lower: default)
473-1169
(583)
335-826
(583)
60-3937
(1169)
Unit: 0.01 inch