Installation manual

3-2 Utilities Rev. F
EPSON Status Viewer Utility
The EPSON Status Viewer monitors the state of the printer and then notifies you of error
information or the level of ink remaining.
The status display function (see “Status display” on page 3-2) and the resident icon function (see
“Resident icon” on page 3-4) enable you to know the state of the printer.
To set up notification, use the status viewer setting function (see “Setting up the status viewer”
on page 3-5).
Note:
The EPSON Status Viewer can be used only if during the printer driver installation operation you have
set the startup type to “Automatic” on the startup type setting screen.
Status display
The status display function provides the following viewing methods for you to know the state of
the printer.
❏ Viewer dialog box (see “Viewer dialog box” on page 3-2)
❏ Balloon (see “Balloon” on page 3-4)
Viewer dialog box
From the [Utility] tab, click [EPSON Status Viewer]. The viewer dialog box appears, as shown
below.
The viewer dialog box appears in the following cases.
Display or hide
cartridge information
Printing
preparation
state
Status information