Specifications

180
[Page Layout] tab
Favorite
Selects one of the registered print settings from the list. This is the default setting when printing.
Changes to setting when installing the printer driver if [Initial setting] is selected.
Orientation
Changes settings of the printing direction (Portrait, Landscape, Rotate 180, Horizontal Flip).
Copies
Sets the number of prints.
Layout
Adjusts the printing position.
Platen Vacuum Manual Adjustment
When this is checked, [Change Vacuum Setting] becomes active. Clicking [Change Vacuum
Setting] displays the [Platen Vacuum Manual Adjustment] screen to adjust the platen vacuum
power. When it is unchecked, the default value of the vacuum power is set. In this case, it is not
necessary for the user to make this adjustment since
this is adjusted in the factory before
shipping.
Watermark
By turning on this check box, the text or the graphics such as “Important” as a watermark is
printed.
This is the adjustment for each printing job and different from [Print Start Position Adjust-
ment] on [Maintenance And Utilities] tab. According to the paper specification (such as the
color of black mark is light, etc.), this adjustment should be performed.
The button is grayed out when [Save Roll] on [Main] tab is not set to “No Saving”.
Since the watermark is printed in front of the printed data, a barcode cannot be read when
the barcode and the watermark overlap each other.