Specifications

188

Status Sheet Printing (Ethernet interface model only)

Network setting can be checked by printing the status sheet for the Ethernet interface model.

Following status sheet is printed when pressing the status sheet button on the rear of the printer.

The network setting can be reset to the default value by turning on the printer while

pressing the status sheet button and holding the button down for 20 seconds or

more.

EPSON Network Status Sheet

1. MAC Address XX : XX : XX : XX : XX : XX

2. HW/SW Version XX . XX/XX . XX

3. Network Status Auto (100Base Full)

4. Port Type Auto

5. Get IP Address Manual

6. IP Address XXX . XXX . XXX . XXX

7. Subnet Mask XXX . XXX . XXX . XXX

8. Default Gateway XXX . XXX . XXX . XXX

9. APIPA Disable

10. Set using PING Disable

11. DNS Address Disable

XXX . XXX . XXX . XXX

12. UPnP Disable

13. Bonjour Disable

14. Port Control LPR Enable

Port 9100 Enable

15. Printing Control Disable

16. Time Server Disable

17. Idle Timeout LPR XXXX sec

Port 9100 XXXX sec

Auto (10 Base Full/10 Base Half/100 Base Full/

100 Base Half)/10 Base Full/10 Base Half/100 Base

Full/100 Base Half

Auto/MDI/MDI-X

Auto/Manual

Enable/Disable