Specifications

228
Ethernet interface model
Set the new printer the network settings such as the IP address of the existing printer. The printer
driver setting is not necessary.
❏ Preparation
•The network setting information of the existing printer (IP address and so on)
Print the status sheet with the existing printer.
(See "Sta
tus Sheet Printing (Ethernet interface model only)" on page 188.)
•The printer setting file of the existing printer
•Turn off the existing printer.
•Confirm the DIP switch setting for the existing printer.
❏ Replacing procedure
➀ Set the new printer’s DIP switch settings to the same as that of the existing printer.
➁ Connect the new printer to the network, and turn it on.
➂ Make the network setting for the new printer according to the printed status sheet using
EpsonNet Config.
➃ Make the setting to the new printer using the printer setting file with the Printer Setting.