Specifications

Chapter 1 Product Overview

Paper

•When using a full-page label, remove the ejected label each time the printing is finished. Oth-

erwise, a part of printed label may be cut, or a cutter error may occur. (See "Status/Error Indi-

cations" on page 21.)

•When cutting the full-page label, adhesive from labels may stick to the fixed blade of the

autocutter, which may prevent the autocutter from cutting paper cleanly. If

this happens, clean

the cutter blade. For details, see "Cleaning the Autocutter" on page 191.

Turning on/off the power switch

•If you turn the printer off without using the power switch, the print head may not return to its

home position. In this case, the next time the printer is turned on, auto head cleaning is per-

formed, which wastes ink.

Printing

•For the USB interface model, it takes time for the next printing if you turn the printer off and

on after printing.

•The ink cartridge contains 3 colors of ink. Even when one particular color is specified, all 3 col-

ors of ink are used for printing an d for keeping the print head in good condition. When the in

level of even one color reaches the lowest limit, the printer stops printing.

•The colors of printouts may become abnormal if you tilt thi s printer or subject the printer to

any shocks. When you move this printer after ink charging, check the colors by performing a

test print.

If the colors of printouts are not normal, perform head cleaning. See "Auto Head Clea

ning" on

page 189 for how to perform head cleaning.

•When printing image data, white lines (lines shown in white) or black lines (overlapping of

image) may appear at about 1 inch intervals in the print result. By setting [Print Head Align-

ment] - [Media Feed Adjustment] in [Maintenance And Utilities] tab, this can be reduced

but cannot be removed completely.

•When printing image dat

a, change of color tone may appear at 1 inch intervals in the print

result.