Specifications

Installation, Printer Handling, Removing a Paper Jam 5-17
TM-H6000/H6000P Developer’s Guide
Confidential
If the paper is jammed in the slip section, turn off the printer and remove the jammed paper and
use a fresh sheet. If you cannot remove the jammed paper easily, open the unit cover. Move the
tabs on the sides of the cover forward and then lift the cover, as shown below.
Push the levers backward to open the unit as shown below, and then remove the jammed paper.
If the paper roll cover cannot be opened because paper is caught in the autocutter in the receipt
section, follow the instructions in the autocutter section below.
Autocutter Jam
If a foreign object such as a push pin or paper clip drops in the autocutter and causes the auto
cutter to lock up, the printer enters an error state and begins the recovery operation
automatically.
If the problem is not serious, the autocutter returns to its normal position without any
intervention by the user.
If the autocutter does not return to its normal position by itself, follow the steps below to correct
the problem:
Tab
Lever
Lever