Specifications

1-4 General Information
Confidential
* CPL = characters per line
* Space between characters is not included
* Characters can be scaled up to 64 times the standard size.
* When using Font B in a font mode such as emphasized mode, some words may be hard to read. Check the font
mode in advance when using Font B.
Endorsement Section
Character structure:
Font A: 12
×
24 (including 2-dot spacing in horizontal)
Font B: 9
×
17 (including 2-dot spacing in horizontal)
Font A is the default
Character size, characters per line
Standard Double-height Double-width
Double-width/
Double-height
W x H
in mm
(inches) CPL
W x H
in mm
(inches) CPL
W x H
in mm
(inches) CPL
W x H
in mm
(inches) CPL
Font A
12 x 24
1.41 x 3.39
(.06” x .13”)
42 1.41 x 6.77
(.06” x .27”)
42 2.82 x 3.39
(.11” x .13”)
21 2.82 x 6.77
(.11” x .27”)
21
Font B
9 x 17
0.99 x 2.40
(.04” x .09”)
56 0.99 x 4.80
(.04” x .19”)
56 1.98 x 2.40
(.08” x .09”)
28 1.98 x 4.80
(.08” x .19”)
28
Printing method:
Shuttle impact dot matrix
Head wire
configuration
8 print solenoids in a horizontal line
Characters per line:
40 columns
Print speed:
Approximately 1.9 LPS
Number of characters:
Alphanumeric characters: 95
International characters: 37
Extended graphics: 128
×
11 pages (including one space page)
Character structure
5
×
7 (total 240 dots horizontally)
Character size
1.1
×
2.42 mm (W
×
H)