Specifications

2-10 Hardware
Confidential
Paper Roll Supply Device Section
Note:
You can use the ESC c 4 command to stop printing upon detection of a paper near-end.
Paper Specifications
Supply method: Drop-in paper roll
Near-end sensor Detection method: Microswitch
Paper roll spool diameter:
Inside: 12 mm (.47")
Outside: 18 mm (.71")
Near-end adjustment: Adjusting screw
Remaining amount: Fixed position
#1 approximately 23 mm (0.9")
#2 approximately 27 mm (1.06")
(The adjusting screw has two positions.)
See Chapter 5.
Paper roll end detection Detection method: Reflective photo sensor
Paper type: Specified thermal paper
Form: Paper roll
Paper width: 79.5
±
0.5 mm (3.13"
±
0.02")
Paper roll size: Roll diameter: Maximum 83 mm (3.27 in.)
Take-up paper roll width: 80+0.0/-1.0 mm (3.15+0.02/-0.04 in.)
Specified paper
(see Chapter 1 more
details):
Specified thermal roll paper, NTP080-80
In Japan: Nakagawa, Seisakujo
In USA: Nakagawa Mfg. (USA) Inc.
In Europe: Nakagawa Mfg. (Europe) GmbH
In Southeast Asia: N.A.K. Mfg. (Malaysia) SDN BHD
[Original paper: TF50KS-E Nippon Paper Industries Co.,Ltd.]
The following paper can be used instead of the specified paper
above:
Original paper: PD 160R (Oji Paper Mfg. Co. Ltd.)
Original paper: AF50KS-E (Jujo Thermal Oy (Finland))
Original paper: P350(F380), P310, P300
(Kanzaki Specialty Papers, Inc. (U.S.A.))