Specifications

4-20 Programming Guide/Tips
Confidential
Note:
Consecutive dots cannot be printed in double density on slip paper (m = 0), because half dots are printed.
Note:
The normal mode (m = 0) cannot be specified when printing on slips in the page mode.
Slip Printer
New Slip Printer Functions
The following are the new slip printer functions:
❏
90° Right Rotation Printing on Slips
• On the TM-H6000, you also can print characters rotated 90° to the right. Only font A can
be used for this type of printing.
❏
Page Mode
• The TM-H6000 can print on the front of slips in the page mode. This enables 180°
rotation of characters and other complicated printing.
❏
Printing on the Back of Slips
• A TM-H6000 with an E/P option can print on the back of paper slips without turning
them over. This is an effective feature for printing on the back following MICR character
reading. Only one font can be used, and a maximum of 40 digits and 8 lines can be
printed.
90° Rotated Printing with the Slip Printer
With the TM-H5000 printer, the
ESC V
command could not be used to rotate characters 90°
when printing on slips, and the printing direction could not be selected in the page mode (with
the
ESC T
command). These features have been incorporated into the TM-H6000.
Please note that these features can be specified only for font A, and not for font B.
Normal Mode Printing
Double Horizontal Mode Printing
Not printed