Specifications
Table Of Contents
- Confidentiality Agreement
- Chapter 1 - Specifications
- Chapter 2 - Outline of Operation
- M-J8000 printer mechanism
- Print mechanism
- Roll paper feed mechanism
- Slip feed mechanism
- Detector mechanisms
- Home-position detector mechanism
- Carriage detector mechanism
- Pump position detector mechanism
- Ink nearend detector mechanism
- Cartridge detector mechanism
- T.O.F. detector mechanism
- Paper-width detector
- B.O.F. detector mechanism
- Slip detector mechanism
- Shutter detector mechanism
- Roll paper detector mechanism
- Roll paper nearend detector mechanism
- Cover-open detector mechanism
- Cutter detector mechanism
- Autocutter mechanism
- Ink system mechanism
- Overview of electrical circuit
- M-J8000 printer mechanism
- Chapter 3 - Handling
- Chapter 4 - Maintenance and Inspection
- Chapter 5 - Repair and Troubleshooting
- Chapter 6 - Disassembly, Assembly, and Adjustment
viii Rev. A
Confidential
Precautions on Handling and Disposal of the Product (continued)
Ink Discharging Cartridge
❏
Do not use a used ink cartridge as the ink discharging cartridge.This may cause ink leakage.
❏
An ink discharging cartridge can be used up to 26 times. Cross out a number from the table on the
label each time the cartridge is used. Dispose of the cartridge after it is used 26 times. Excess use will
cause ink leakage.
Display Module Connector
❏
The display module connector (DM) cannot be used with a printer with parallel interface. This
connector is only available for a printer with a serial interface.
Printer Cover
❏
Immediately close the printer cover after pressing the CLEANING button to start head cleaning.