Specifications
Table Of Contents
- Confidentiality Agreement
- Chapter 1 - Specifications
- Chapter 2 - Outline of Operation
- M-J8000 printer mechanism
- Print mechanism
- Roll paper feed mechanism
- Slip feed mechanism
- Detector mechanisms
- Home-position detector mechanism
- Carriage detector mechanism
- Pump position detector mechanism
- Ink nearend detector mechanism
- Cartridge detector mechanism
- T.O.F. detector mechanism
- Paper-width detector
- B.O.F. detector mechanism
- Slip detector mechanism
- Shutter detector mechanism
- Roll paper detector mechanism
- Roll paper nearend detector mechanism
- Cover-open detector mechanism
- Cutter detector mechanism
- Autocutter mechanism
- Ink system mechanism
- Overview of electrical circuit
- M-J8000 printer mechanism
- Chapter 3 - Handling
- Chapter 4 - Maintenance and Inspection
- Chapter 5 - Repair and Troubleshooting
- Chapter 6 - Disassembly, Assembly, and Adjustment
Rev. A Disassembly, Assembly, and Adjustment 6-15
TM-J8000/J8000P Technical Manual
Confidential
4. Remove the two screws (C.P.S-tite (O), 3 x 6) and remove the connector box.
Figure 6-18 Removing the connector box
5. Turn the gear to open the shutter.
Figure 6-19 Opening the shutter
6. Lift up the head carriage lock using a flat head screwdriver or similar tool.
Figure 6-20 Unlocking the head carriage lock
Connector box
C.P.S-tite (O), 3 x 6
C.P.S-tite (O), 3 x 6
Shutter
Gear
Head
carriage
lock