Specifications

6-20 Disassembly, Assembly, and Adjustment Rev. A
Confidential
Case, lower assembly
Follow the steps below to disassemble the parts.
1. Remove the covers and
Case, upper assembly
. See the “Covers and upper case” section in
this chapter.
2. Remove the
Mechanism assembly, M-J8000
. See the “Mechanism assembly, M-J8000”
section in this chapter.
3. Remove two
Hexagon socket head bolts, 3 x 5
and three C.B.S-tite, 3 x 6 screws. To
remove the
Hexagon socket head bolts, 3 x 5
, use a hexagonal driver (2.5 mm).
Figure 6-27 Removing the bolts
4. Lift one side of the
Plate, lower assembly
as shown and disconnect the fan cable; then
remove the
Plate, lower assembly
. Lift up the
Case, lower assembly
.
Figure 6-28 Removing the Plate, lower assembly
Hexagon socket head bolts, 3 x 5
C.B.S-tite, 3 x 6
Plate, lower
assembly
Fan cable
connector
Case, lower
assembly