Specifications
Table Of Contents
- Confidentiality Agreement
- Chapter 1 - Specifications
- Chapter 2 - Outline of Operation
- M-J8000 printer mechanism
- Print mechanism
- Roll paper feed mechanism
- Slip feed mechanism
- Detector mechanisms
- Home-position detector mechanism
- Carriage detector mechanism
- Pump position detector mechanism
- Ink nearend detector mechanism
- Cartridge detector mechanism
- T.O.F. detector mechanism
- Paper-width detector
- B.O.F. detector mechanism
- Slip detector mechanism
- Shutter detector mechanism
- Roll paper detector mechanism
- Roll paper nearend detector mechanism
- Cover-open detector mechanism
- Cutter detector mechanism
- Autocutter mechanism
- Ink system mechanism
- Overview of electrical circuit
- M-J8000 printer mechanism
- Chapter 3 - Handling
- Chapter 4 - Maintenance and Inspection
- Chapter 5 - Repair and Troubleshooting
- Chapter 6 - Disassembly, Assembly, and Adjustment
Rev. A Disassembly, Assembly, and Adjustment 6-23
TM-J8000/J8000P Technical Manual
Confidential
To install, reverse the removal procedure. Read the following notes before installation.
Notes for installation:
1. Fold the
F
FF
FF
FF
FC
CC
C,
, ,
, L
LL
L
as shown below. Fold it so that the dotted lines shown in the illustration are on the
outside, not the inside, of the fold.
Figure 6-32 Folding the FFC, L
Main circuit board unit side
Mechanism assembly side
Manufacturer’s name
printed on this side of cable
(100 % scale)
[units: mm]