Specifications

6-26 Disassembly, Assembly, and Adjustment Rev. A
Confidential
Circuit boards
Follow the steps below to disassemble the parts.
1. Turn printer on its side with the ink cartridge side facing down.
CAUTION:
Do not turn the printer upside down since it may cause ink to leak. After turning the
printer back upright, check whether it prints properly.
Figure 6-35 Turning the printer
2. Remove two screws (C.P.(O), 3 x 8) and pull out the I/F circuit board unit.
Figure 6-36 Removing the I/F circuit board unit
I/F circuit board unit
C.P.(O), 3 x 8
C.P.(O), 3 x 8