Specifications

Rev. A Disassembly, Assembly, and Adjustment 6-29
TM-J8000/J8000P Technical Manual
Confidential
6. Remove one long screw (C.C., 3 x 30) and the
Spacer
next to the battery. Remove the other
five screws (C.P.(O), 3 x 8); then remove the
Main circuit board unit
.
Figure 6-40 Removing the Main circuit board unit
CAUTION:
A lithium battery is mounted on the Main circuit board unit. Do not short the
terminals of this battery.
7. Put you finger under the connector and press the tab to unlock the connector; then pull out
the connector. Disconnect the other connector with the same way.
Figure 6-41 Disconnecting the connectors
C.C., 3 x 30 and Spacer
C.P.(O), 3 x 8
C.P.(O), 3 x 8
C.P.(O), 3 x 8
C.P.(O), 3 x 8
C.P.(O), 3 x 8
Main circuit
board unit
Connectors