Specifications
Table Of Contents
- Confidentiality Agreement
- Chapter 1 - Specifications
- Chapter 2 - Outline of Operation
- M-J8000 printer mechanism
- Print mechanism
- Roll paper feed mechanism
- Slip feed mechanism
- Detector mechanisms
- Home-position detector mechanism
- Carriage detector mechanism
- Pump position detector mechanism
- Ink nearend detector mechanism
- Cartridge detector mechanism
- T.O.F. detector mechanism
- Paper-width detector
- B.O.F. detector mechanism
- Slip detector mechanism
- Shutter detector mechanism
- Roll paper detector mechanism
- Roll paper nearend detector mechanism
- Cover-open detector mechanism
- Cutter detector mechanism
- Autocutter mechanism
- Ink system mechanism
- Overview of electrical circuit
- M-J8000 printer mechanism
- Chapter 3 - Handling
- Chapter 4 - Maintenance and Inspection
- Chapter 5 - Repair and Troubleshooting
- Chapter 6 - Disassembly, Assembly, and Adjustment
Rev. A Disassembly, Assembly, and Adjustment 6-33
TM-J8000/J8000P Technical Manual
Confidential
3. Disconnect the fan cable and remove the
Plate, lower assembly
.
Figure 6-47 Removing the Plate, lower assembly
4. Remove the two screws (C.C.S-tite, 3 x 16); then remove the
Fan assembly
.
Figure 6-48 Removing the Fan assembly
Plate, lower assembly
Fan assembly
Fan assembly
C.C.S-tite, 3 x 16