Specifications

6-38 Disassembly, Assembly, and Adjustment Rev. A
Confidential
To install, reverse the removal procedure. Read the following notes before installation.
Notes for installation:
1) To connect the cables on the Connector board, find the connector whose number of pins, shape, and
color matches; then connect it.
2) While installing the connector box, make sure that no cables are caught.
3) To install the connector box, hook the tab (marked with “1”) first and slide the box to the left; then set
the tab (marked with “2”).
Figure 6-55 Installing the connector box
4) When you install the Cover, connector board, make sure that the cable wires of the carriage motor
come out from the slit shown below. Be sure no cables are caught.
Figure 6-56 Arranging the cables
❶
Connector box
❷
Cover, connector
board
Cable wires of
carriage motor
(thickest cables;
total 6 wires)
Slit