Specifications
Table Of Contents
- Confidentiality Agreement
- Chapter 1 - Specifications
- Chapter 2 - Outline of Operation
- M-J8000 printer mechanism
- Print mechanism
- Roll paper feed mechanism
- Slip feed mechanism
- Detector mechanisms
- Home-position detector mechanism
- Carriage detector mechanism
- Pump position detector mechanism
- Ink nearend detector mechanism
- Cartridge detector mechanism
- T.O.F. detector mechanism
- Paper-width detector
- B.O.F. detector mechanism
- Slip detector mechanism
- Shutter detector mechanism
- Roll paper detector mechanism
- Roll paper nearend detector mechanism
- Cover-open detector mechanism
- Cutter detector mechanism
- Autocutter mechanism
- Ink system mechanism
- Overview of electrical circuit
- M-J8000 printer mechanism
- Chapter 3 - Handling
- Chapter 4 - Maintenance and Inspection
- Chapter 5 - Repair and Troubleshooting
- Chapter 6 - Disassembly, Assembly, and Adjustment
Rev. A Disassembly, Assembly, and Adjustment 6-41
TM-J8000/J8000P Technical Manual
Confidential
To install, reverse the removal procedure. Read the following notes before installation.
Notes for installation:
1) Move the head carriage to the left end position before you install the Pump unit.
2) Move the cleaning plate backward by lifting the head carriage lock lever up before you install the Pump
unit. This operation is necessary because the head nozzle can be damaged if the nozzle contacts the
cleaning plate before the plate contains ink.
Figure 6-60 Head carriage lock lever
3) Insert the cables for the Pump unit into the clamp shown below.
Figure 6-61 Clamp for the Pump unit cables
4) Make sure that no cables are caught.
Head carriage
lock lever
Clamp