Specifications
Table Of Contents
- Confidentiality Agreement
- Chapter 1 - Specifications
- Chapter 2 - Outline of Operation
- M-J8000 printer mechanism
- Print mechanism
- Roll paper feed mechanism
- Slip feed mechanism
- Detector mechanisms
- Home-position detector mechanism
- Carriage detector mechanism
- Pump position detector mechanism
- Ink nearend detector mechanism
- Cartridge detector mechanism
- T.O.F. detector mechanism
- Paper-width detector
- B.O.F. detector mechanism
- Slip detector mechanism
- Shutter detector mechanism
- Roll paper detector mechanism
- Roll paper nearend detector mechanism
- Cover-open detector mechanism
- Cutter detector mechanism
- Autocutter mechanism
- Ink system mechanism
- Overview of electrical circuit
- M-J8000 printer mechanism
- Chapter 3 - Handling
- Chapter 4 - Maintenance and Inspection
- Chapter 5 - Repair and Troubleshooting
- Chapter 6 - Disassembly, Assembly, and Adjustment

6-44 Disassembly, Assembly, and Adjustment Rev. A
Confidential
7. Remove the four screws (C.C.S-tite, 3 x 5) from inside the
Roll paper unit
.
Figure 6-66 Removing the screws
8. Unhook the
Cartridge frame unit
’s cable from the three hooks on the
Roll paper unit
.
Figure 6-67 Unhooking the cable
C.C.S-tite, 3 x 5
C.B.S-tite, 3 x 6
Cable










