Specifications

6-48 Disassembly, Assembly, and Adjustment Rev. A
Confidential
Head unit
CAUTION:
To maintain print quality, do not let any objects touch or contact the head nozzle.
Figure 6-72 Head nozzle
Follow the steps below to disassemble the unit.
1. Perform the head exchange sequence using the TM-J8000 Service Utility. See the “Head
exchange sequence” section in Chapter 5.
2. Remove the screw (C.B.P-tite, 3 x 12) from the
Damper sub-unit
. (After you have performed
the head exchange sequence, the head carriage has been unlocked and moved to the left
end.)
Figure 6-73 Removing the screw
nozzle
Damper sub-unit
C.B.P-tite, 3 x 12