Specifications
Table Of Contents
- Confidentiality Agreement
- Chapter 1 - Specifications
- Chapter 2 - Outline of Operation
- M-J8000 printer mechanism
- Print mechanism
- Roll paper feed mechanism
- Slip feed mechanism
- Detector mechanisms
- Home-position detector mechanism
- Carriage detector mechanism
- Pump position detector mechanism
- Ink nearend detector mechanism
- Cartridge detector mechanism
- T.O.F. detector mechanism
- Paper-width detector
- B.O.F. detector mechanism
- Slip detector mechanism
- Shutter detector mechanism
- Roll paper detector mechanism
- Roll paper nearend detector mechanism
- Cover-open detector mechanism
- Cutter detector mechanism
- Autocutter mechanism
- Ink system mechanism
- Overview of electrical circuit
- M-J8000 printer mechanism
- Chapter 3 - Handling
- Chapter 4 - Maintenance and Inspection
- Chapter 5 - Repair and Troubleshooting
- Chapter 6 - Disassembly, Assembly, and Adjustment

1-2 Specifications Rev. A
Confidential
❏ Ink cartridge:
• Using a large ink cartridge enables a long time between cartridge changes and low
running cost (approximately 12,000,000 characters per cartridge with Font B continuous
printing).
❏ Internal buffer:
• 45 or 4 K receive buffer can be selected.
❏ Command protocol:
• Command protocol is based on the ESC/POS
®
standard.
❏ Paper formats:
• Narrow to wide format paper can be used—from a personal check (approximately
70 mm) to US letter (216 mm) using Font A, 36 to 130 column printing.
❏ Autocutter:
• The autocutter uses a circular cut method with a high-quality blade and a long life
(approximately 2,000,000 cuts).
❏ Paper roll sensor:
• Paper end and paper near-end sensors are standard.
❏ Printer driver:
• OCX driver and Windows driver are supported.










