Specifications

Rev. A Disassembly, Assembly, and Adjustment 6-53
TM-J8000/J8000P Technical Manual
Confidential
6. Pull back the
Cartridge frame unit
until it stops, and lift it up; then put it on the frame as
shown below.
Figure 6-81 Removing the Cartridge frame unit
7. Wearing rubber fingertips, unfasten the
Joint, M6
and disconnect the
Damper sub-unit
’s
tube from the
Cartridge frame unit
.
CAUTION:
Wear rubber fingertips before you touch the tube. Contamination of the tip of the
tube could cause ink leakage.
Figure 6-82 Disconnecting the Damper sub-unit’s tube
Joint, M6
Damper sub-unit’s
tube