Specifications

6-56 Disassembly, Assembly, and Adjustment Rev. A
Confidential
3. Connect the
Damper sub-unit
’s tube into the
Cartridge frame unit
until the tube stops at
the
O ring, tube fastener
; then secure the
Joint, M6
with the torque-limiting wrench.
(Tightening torque is 0.12 to 0.16 Nm or 1.2 to 1.6 kgcm.)
CAUTION:
Tightening with any other tool may damage the tube and cause ink leaks. Low
tightening torque may also cause ink leakage.
Figure 6-86 Connecting the Damper sub-unit’s tube
4. Hook the
Tube, waste
with the clamp and bend it as shown below.
Figure 6-87 Hooking and forming the Tube, waste
Joint, M6
Damper sub-unit’s
tube
Clamp
Tube, waste