Specifications

6-64 Disassembly, Assembly, and Adjustment Rev. A
Confidential
To install, reverse the removal procedure. Read the following notes before installation.
Notes for installation:
1. When you install the Fp circuit, head to the Carriage unit, pull out the connector lock first. Then
connect the Fp circuit, head into the connector and push back the connector lock to secure the Fp
circuit, head.
Figure 6-100 Connecting the Fp circuit, head
2. When you install the Damper sub-unit, hook the Damper sub-unit’s spring-tube to the tab on the
Carriage unit as shown below.
Figure 6-101 Hooking the spring-tube
Connector
unlocked
Connector
locked
Damper sub-unit’s
spring-tube
38 mm
Tab
edge of the frame