Specifications

6-68 Disassembly, Assembly, and Adjustment Rev. A
Confidential
5. Remove three screws (C.C.S-tite, 3 x 6) and remove an assembly (center roller fixing plate
sub-assembly) from the
Shutter unit
.
Figure 6-108 Removing the center roller fixing plate sub-assembly
Note:
During installation of the Shutter unit, the above assembly (center roller fixing plate sub-assembly)
must be assembled after you secured the Shutter unit.
6. Remove the two screws and remove the
Dummy, MICR
.
Figure 6-109 Removing the Dummy, MICR
C.C.S-tite, 3 x 6
C.C.S-
tite, 3 x 6
C.P.B-
tite(P2),
3 x 12
Dummy,
MICR