Specifications
Table Of Contents
- Confidentiality Agreement
- Chapter 1 - Specifications
- Chapter 2 - Outline of Operation
- M-J8000 printer mechanism
- Print mechanism
- Roll paper feed mechanism
- Slip feed mechanism
- Detector mechanisms
- Home-position detector mechanism
- Carriage detector mechanism
- Pump position detector mechanism
- Ink nearend detector mechanism
- Cartridge detector mechanism
- T.O.F. detector mechanism
- Paper-width detector
- B.O.F. detector mechanism
- Slip detector mechanism
- Shutter detector mechanism
- Roll paper detector mechanism
- Roll paper nearend detector mechanism
- Cover-open detector mechanism
- Cutter detector mechanism
- Autocutter mechanism
- Ink system mechanism
- Overview of electrical circuit
- M-J8000 printer mechanism
- Chapter 3 - Handling
- Chapter 4 - Maintenance and Inspection
- Chapter 5 - Repair and Troubleshooting
- Chapter 6 - Disassembly, Assembly, and Adjustment

6-74 Disassembly, Assembly, and Adjustment Rev. A
Confidential
9. Remove the following parts from the
Paper guide, slip, lower
.
• B.O.F. detector sub-assembly
• Slip detector sub-assembly
• Shaft, slip detect lever/Spring, slip detect lever/Lever, slip detect
Figure 6-119 Removing the parts from the Paper guide, slip, lower
Shaft, slip detect
lever
Slip detector sub-
assembly
B.O.F. detector
sub-assembly
Spring, slip detect lever
Lever, slip detect
E-ring (1.2)
E-ring (1.2)
C.B.P-tite, 2.6 x 8










