Specifications

Rev. A Outline of Operation 2-11
TM-J8000/J8000P Technical Manual
Confidential
When the J/S changeover mechanism is switched to the slip-feed mechanism side, the drive
power from the paper feed motor ("Motor, paper feed") drives each gear on the drive side; all
three of the slip-feed rollers rotate simultaneously.
Figure 2-16 Slip feed roller Section
Front-feed rollers
The driven rollers ("Roller, slip hold, front") are opened and closed by a shutter mechanism to
which they are linked.
Center-feed rollers
The surface of the rollers that make contact with the paper have been blast-coated with metal
powder. The three driver rollers ("roller, slip hold, center") are supported on the groove of the
shutter frame ("Frame, shutter") by the shaft ("Shaft, slip hold, center"). The paper is held by the
force of the spring ("Spring, slip hold, center) through the lever ("Lever, sleeve hold, center").
gear, slip feed
gear, slip feed transmit 2
roller, slip hold, front
roller, slip hold, top
gear, slip feed reduction
gear, slip feed
roller, slip feed, top
gear, slip feed
roller, slip hold, center
gear, slip feed transmit 1
motor, paper feed
gear, J/S changeover
roller, slip feed, front
roller, slip feed, center