Specifications
Table Of Contents
- Confidentiality Agreement
- Chapter 1 - Specifications
- Chapter 2 - Outline of Operation
- M-J8000 printer mechanism
- Print mechanism
- Roll paper feed mechanism
- Slip feed mechanism
- Detector mechanisms
- Home-position detector mechanism
- Carriage detector mechanism
- Pump position detector mechanism
- Ink nearend detector mechanism
- Cartridge detector mechanism
- T.O.F. detector mechanism
- Paper-width detector
- B.O.F. detector mechanism
- Slip detector mechanism
- Shutter detector mechanism
- Roll paper detector mechanism
- Roll paper nearend detector mechanism
- Cover-open detector mechanism
- Cutter detector mechanism
- Autocutter mechanism
- Ink system mechanism
- Overview of electrical circuit
- M-J8000 printer mechanism
- Chapter 3 - Handling
- Chapter 4 - Maintenance and Inspection
- Chapter 5 - Repair and Troubleshooting
- Chapter 6 - Disassembly, Assembly, and Adjustment
Rev. A Outline of Operation 2-29
TM-J8000/J8000P Technical Manual
Confidential
catching and cutting the paper. The cutter carriage sub-assembly then reaches home position on
the side opposite from which it started, causing the detection mechanism to output a HIGH
signal. The system responds by stopping the cutter motor, completing the sequence.
Figure 2-41 Cutting operation
Ink system mechanism
The ink system mechanism consists of the following three mechanisms.
❏ Pump mechanism
❏ Capping mechanism
❏ Wiping/carriage-lock mechanism