Specifications
Table Of Contents
- Confidentiality Agreement
- Chapter 1 - Specifications
- Chapter 2 - Outline of Operation
- M-J8000 printer mechanism
- Print mechanism
- Roll paper feed mechanism
- Slip feed mechanism
- Detector mechanisms
- Home-position detector mechanism
- Carriage detector mechanism
- Pump position detector mechanism
- Ink nearend detector mechanism
- Cartridge detector mechanism
- T.O.F. detector mechanism
- Paper-width detector
- B.O.F. detector mechanism
- Slip detector mechanism
- Shutter detector mechanism
- Roll paper detector mechanism
- Roll paper nearend detector mechanism
- Cover-open detector mechanism
- Cutter detector mechanism
- Autocutter mechanism
- Ink system mechanism
- Overview of electrical circuit
- M-J8000 printer mechanism
- Chapter 3 - Handling
- Chapter 4 - Maintenance and Inspection
- Chapter 5 - Repair and Troubleshooting
- Chapter 6 - Disassembly, Assembly, and Adjustment

2-38 Outline of Operation Rev. A
Confidential
Power-ON/OFF control
The TM-J8000 power provides two power switches: one on the front and one on the rear. A block
diagram of the power on/off control circuit appears below.
.
Figure 2-48 Block diagram of power on/off control circuit
The following tables shows how the power on/off logic circuit operates.
Table 2-3 Logic circuit operation (where rear power switch is activated first)
– : Not relevant
Sequence Dipswitch Settings DC Output
(1) Rear Power
Switch
(2) Front Power
Switch
(3) IM-5*5 Power DSW2-4 DSW2-5 (Printer Control)
ON OFF – – – OFF
ON – – OFF ON
ON OFF – ON OFF
ON – ON ON










