Specifications
Table Of Contents
- Confidentiality Agreement
- Chapter 1 - Specifications
- Chapter 2 - Outline of Operation
- M-J8000 printer mechanism
- Print mechanism
- Roll paper feed mechanism
- Slip feed mechanism
- Detector mechanisms
- Home-position detector mechanism
- Carriage detector mechanism
- Pump position detector mechanism
- Ink nearend detector mechanism
- Cartridge detector mechanism
- T.O.F. detector mechanism
- Paper-width detector
- B.O.F. detector mechanism
- Slip detector mechanism
- Shutter detector mechanism
- Roll paper detector mechanism
- Roll paper nearend detector mechanism
- Cover-open detector mechanism
- Cutter detector mechanism
- Autocutter mechanism
- Ink system mechanism
- Overview of electrical circuit
- M-J8000 printer mechanism
- Chapter 3 - Handling
- Chapter 4 - Maintenance and Inspection
- Chapter 5 - Repair and Troubleshooting
- Chapter 6 - Disassembly, Assembly, and Adjustment
Rev. A Outline of Operation 2-39
TM-J8000/J8000P Technical Manual
Confidential
Table 2-4 Logic circuit operation (where rear power switch is activated last)
– : Not relevant
Switch circuit board assembly
This assembly has the control-panel LEDs and switches. It also has the carriage-cover open
detector (magnetic sensor).
Fan assembly
The fan serves to cool the inside of the printer. The fan continues to run so long as +5V VCC is
being output.
Sequence Dipswitch Settings DC Output
(1) Front Power
Switch
(2) IM-5*5 Power (3) Rear Power
Switch
DSW2-4 DSW2-5 (Printer Control)
OFF – ON – – OFF
ON – OFF – OFF
–ONOFFON
OFF ON ON OFF
ON ON ON ON