Specifications
Table Of Contents
- Confidentiality Agreement
- Chapter 1 - Specifications
- Chapter 2 - Outline of Operation
- M-J8000 printer mechanism
- Print mechanism
- Roll paper feed mechanism
- Slip feed mechanism
- Detector mechanisms
- Home-position detector mechanism
- Carriage detector mechanism
- Pump position detector mechanism
- Ink nearend detector mechanism
- Cartridge detector mechanism
- T.O.F. detector mechanism
- Paper-width detector
- B.O.F. detector mechanism
- Slip detector mechanism
- Shutter detector mechanism
- Roll paper detector mechanism
- Roll paper nearend detector mechanism
- Cover-open detector mechanism
- Cutter detector mechanism
- Autocutter mechanism
- Ink system mechanism
- Overview of electrical circuit
- M-J8000 printer mechanism
- Chapter 3 - Handling
- Chapter 4 - Maintenance and Inspection
- Chapter 5 - Repair and Troubleshooting
- Chapter 6 - Disassembly, Assembly, and Adjustment
Rev. A Handling 3-7
TM-J8000/J8000P Technical Manual
Confidential
A view of the underside of the printer is shown below.
Figure 3-3 Underside of the printer
CAUTION:
Be sure to turn the printer on its side with the ink cartridge side facing down when you
access the DIP switches. Do not turn the printer upside down since it may cause ink to
leak. After turning the printer back upright, check whether it prints properly.
Table 3-8 Part names and functions (underside)
Name Function
DIP switch cover Open this cover to change the DIP switch settings. See “DIP Switches” in
Chapter 1, “Specifications,” for details.
DIP switch cover