Specifications
Table Of Contents
- Confidentiality Agreement
- Chapter 1 - Specifications
- Chapter 2 - Outline of Operation
- M-J8000 printer mechanism
- Print mechanism
- Roll paper feed mechanism
- Slip feed mechanism
- Detector mechanisms
- Home-position detector mechanism
- Carriage detector mechanism
- Pump position detector mechanism
- Ink nearend detector mechanism
- Cartridge detector mechanism
- T.O.F. detector mechanism
- Paper-width detector
- B.O.F. detector mechanism
- Slip detector mechanism
- Shutter detector mechanism
- Roll paper detector mechanism
- Roll paper nearend detector mechanism
- Cover-open detector mechanism
- Cutter detector mechanism
- Autocutter mechanism
- Ink system mechanism
- Overview of electrical circuit
- M-J8000 printer mechanism
- Chapter 3 - Handling
- Chapter 4 - Maintenance and Inspection
- Chapter 5 - Repair and Troubleshooting
- Chapter 6 - Disassembly, Assembly, and Adjustment
Rev. A Handling 3-13
TM-J8000/J8000P Technical Manual
Confidential
Installing or Replacing the Ink Cartridge
CAUTION:
❏
Do not put your finger inside the ink cartridge holder which contains the ink
cartridge. The ink supply needle inside the holder may cause injury.
❏
Do not shake or drop an ink cartridge that has been installed. Ink leaking from the
cartridge may get in your eyes. Also, ink stains can be impossible to remove from
clothing.
❏
If ink from the cartridge gets in your eyes, rinse immediately with clean water and
consult a doctor.
❏
Store ink cartridges out of the reach of children.
To install the ink cartridge, follow these steps.
1. Turn on the power.
2. Open the ink cartridge cover, using the tab as shown.
Figure 3-11 Opening the ink cartridge cover
Tab