Specifications

Rev. A Repair and Troubleshooting 5-3
TM-J8000/J8000P Technical Manual
Confidential
Torque-limiting wrench
Shape of the tip
<Shape of the tip>
7 mm
<Tightening torque>
0.12 to 0.16 N-m
(1.2 to 1.6 kg-cm)
(*) Tightening torque
should be set by the tool
supplier.
To tighten the Joints,M6.
(The Joints,M6 is mounted
on the Damper sub-unit).
Tightening with any other
tool may damage the
tube and cause ink leaks.
Low tightening torque may
also cause ink leakage.
Finger stall (At least 2 stalls) – To handle the tube of the
Damper sub-unit.
Crosshead screwdriver No. 0 Other assembly/
disassembly
Crosshead screwdriver No. 1 Other assembly/
disassembly
Crosshead screwdriver No. 2 Other assembly/
disassembly
Flathead screwdriver – Other assembly/
disassembly
Tweezers – Other assembly/
disassembly
E-ring holder 1.5, 2.0, 2.5, 3.0, 4.0 and 6.0 Other assembly/
disassembly
Soldering iron – Other assembly/
disassembly
Wrist band – Other assembly/
disassembly
Table 5-2 Tools available commercially
Commercial Tool Size Purpose