User`s manual

10 TM-J8000 User’s Manual
English
TM-J8000 specifications
Print method Serial ink jet matrix method
Dot density 360 × 360 dpi [dpi: dots per 25.4 mm (dots per inch)]
Print direction Bidirectional with logic seeking
Paper feed method Friction feed
Head control Fine and economy
Print fonts Font A (default)/font B/extended font A: 22 × 48/18 × 36/36 × 48,
including spacing on the right
Columns Receipt Font A/font B/extended font A: 42/51/25
Slip Font A/font B/extended font A: 38-130/46-158/23-79
Character size 1.48 × 3.32/1.20 × 2.47/2.47 × 3.32 mm {0.058 × 0.131"/0.047 × 0.097"/0.097 × 0.131"} (W × H)
Character sets 95 alphanumeric, 32 international characters
128 × 9 pages extended graphic characters, 16 extended font A characters
Ink cartridge
specification
SJIC1 (black ink)
Print speed
Paper feed speed Receipt or slip — 35.3 ms/line using a 4.23 mm {1/6"} line pitch
120 mm/s {approximately 4.7"/s} (28.3 lines/second) when continuous paper feed
Line spacing 4.23 mm {1/6"}; programmable by control command, default
Paper roll
(single-ply)
Width: 76 mm ± 0.5 mm {2.99" ± 0.02"}
Maximum outside diameter: 83 mm {3.27"} or less
Paper roll spool inside diameter: 10 mm {0.39"} or more
Paper must not be pasted to the spool.
Slip paper 68 – 215.9 mm × 68 – 297 mm {2.7 – 8.5 × 2.7 – 11.7"} (W × L). Normal, single-ply only.
Total slip thickness 0.09 to 0.15 mm {0.0035 to 0.0059"}
DKD function 2 drives
DM connection Display connection available only for a serial interface model printer
Interfaces RS-232, RS-485, or IEEE 1284
Buffer size Receive 45 bytes or 4KB, set with DIP switch User-defined receipt: 12KB; slip: 5KB
Macro 2KB
Supply voltage AC85 V – 264.5 V (only for single phase); built-in universal power supply
Current
consumption
25 W (operating)
Reliability Receipt mechanism:10 million lines Autocutter: 2 million cuts
Slip mechanism: 5 million lines MTBF: 180,000 hours
Print head: 800 million dots/nozzle MCBF: 29 million lines
Temperature and
humidity
Printing: 10° to 35°C {50° to 95°F}, 20 - 80% RH (non-condensing)
Standby: 5° to 40°C {41° to 104°F}, 20 - 80% RH (non-condensing)
Storage: –20° to 60°C {–4° to 140°F}, 5 - 85% RH (packed without ink)
–20° to 40°C {–4° to 104°F}, 20 - 85% RH (packed with ink)
Dimensions 200 × 325 × 300 mm {7.9 × 12.8 × 11.8"} (H × W × D)
Weight (mass) 9 kg {19.8 lb}
Receipt
Slip
lps: lines per second; cpl: characters per line
Head control
method
Font A
20 cpl
Font B
25 cpl
Extended
Font A 12 cpl
Font A
42 cpl
Font B
51 cpl
Extended
Font A 25 cpl
Fine 11.8 lps 16.9 lps 11.8 lps 9.0 lps 13.1 lps 9.0 lps
Economy 12.6 lps 18.1 lps — 10.1 lps 14.7 lps —
Head control
method
Font A
65 cpl
Font B
80 cpl
Extended
Font A 40 cpl
Font A
130 cpl
Font B
158 cpl
Extended
Font A 79 cpl
Fine 6.8 lps 10.0 lps 6.8 lps 4.2 lps 6.2 lps 4.2 lps
Economy 7.8 lps 11.3 lps — 4.9 lps 7.3 —
J8u-7.book Page 10 Friday, May 17, 2002 2:18 PM