User`s manual

Printer Parts
DIP Switch Tables
Serial interface Transmission speed
Parallel interface
SW Function ON OFF Speed 1-7 1-8
1-1 Data receive error Ignored Prints ‘?’ 2400 ON ON
1-2 Receive buffer capacity 45 bytes 4KB 4800 OFF ON
1-3 Handshaking XON/XOFF DTR/DSR 9600 ON OFF
1-4 Data word length
7 bits 8 bits
19200 OFF OFF
1-5 Parity check Enabled Disabled
1-6 Parity selection Even Odd
1-7, 1-8 Transmission speed (see table at right)
SW Function ON OFF
2-1 Handshaking (BUSY) Receive buffer full Offline or receive buffer full
2-2 Customer display connection Connected Not connected
2-3 Head rank Rank B Rank A
2-4 Power switch setting Fixing mode Normal
2-5 IM connection Connected Not connected
2-6 Internal use — Fixed
2-7 I/F pin 6 reset Enabled Disabled
2-8 I/F pin 25 reset Enabled Disabled
SW Function ON OFF
1-1 Auto line feed Always enabled Always disabled
1-2 Receive buffer capacity 45 bytes 4KB
1-3 ~ 1-8 Undefined — —
SW Function ON OFF
2-1 Handshaking. Receive buffer full or
reading data
Offline, receive buffer full, or
reading data
2-2 Internal use. Do not change. — Fixed to OFF.
2-3 Head rank switching. Rank B Rank A
2-4 Power switch setting. Fixing mode Normal
2-5 IM connection. Connected Not connected
2-6 Reserved. Do not change — Fixed to OFF.
2-7 Not used for parallel interface. — Fixed to OFF.
2-8 I/F pin 31 reset. Do not change. Fixed to ON. —
1 printer cover
2 control panel
4 roll paper cover
3 ink cartridge cover
A
J8u-7.book Page 0 Friday, May 17, 2002 2:18 PM